Further High Grade Lithium Intersections at Red Mountain
Released
Released
Announcement PDF
22 July 2024
RED MOUNTAIN LITHIUM DISCOVERY BOLSTERED WITH
MORE OUTSTANDING THICK INTERSECTIONS
Second batch of assays delivers further high-grade intersections
Key Highlights
•
Multiple lithium intersections reported in assay results
for the next four holes, RMRC004-007, with intersections
up to +80m thickness, including:
•
RMRC004: 83.8m @ 1,230ppm Li from 16.8m.
•
RMRC005: 80.8m @ 1,270ppm Li from 56.4m
•
RMRC006: 62.5m @ 1,070ppm Li from 6.1m and 70.1m @
1,090ppm Li from 89.9m
•
RMRC007: 74.7m @ 1,160ppm Li from 18.3m
•
Intersections sit mid-project within 4.6km of strike
length drilled to date at Red Mountain.
•
Assay results for the remaining four drill holes expected in
late July.
Astute Metals NL (ASX: ASE) (“ASE”, “Astute” or “the Company”) is pleased to advise that assay results
from the next four holes, RMRC004-007, of the inaugural Reverse Circulation (RC) drilling campaign at
its 100%-owned Red Mountain Lithium Project in Nevada, USA, have returned high-grade mineralisation.
Assay results from the second batch of samples include the following drill intersections:
•
RMRC004 : 13.7m @ 1,070ppm Li / 0.57% Lithium Carbonate Equivalent1 (LCE) from surface
83.8m @ 1,230ppm Li / 0.65% LCE from 16.8m
•
RMRC005 : 26.0m @ 656ppm Li / 0.35% LCE from 3.0m
80.8m @ 1,270ppm Li / 0.68% LCE from 56.4m to End of Hole
•
RMRC006 : 62.5m @ 1,070ppm Li / 0.57% LCE from 6.1m
15.3m @ 896ppm Li / 0.48% LCE from 71.6m
70.1m @ 1,090ppm Li / 0.58% LCE from 89.9m
•
RMRC007 : 74.7m @ 1,160ppm Li / 0.61% LCE from 18.3m
25.9m @ 1,580ppm Li / 0.84% LCE from 115.8m
This second batch of assays, from drill holes located centrally within the group drilled so far (Figure 1),
demonstrate thicker intersections than those previously announced, with all four holes intersecting +70m
zones grading over 1,000ppm lithium. These outstanding results indicate the scale and grade potential
at Red Mountain, as it continues to emerge as a project of significance in North America. Assays for the
final four holes from the campaign are expected to be received later this month, which, along with other
results, will allow the Company to determine the next steps at this highly prospective Project.
Suite 6, Level 5, 189 Kent St, Sydney NSW 2000 | GPO Box 2733, Sydney NSW 2001
+61 (0) 2 8046 2799 | admin@astutemetals.com
www.astutemetals.com
Astute Chairman, Tony Leibowitz, said:
“Our confidence in the scale and significance of this discovery continues to increase with each
successful drill-hole at Red Mountain. Assays from the latest four holes have exceeded expectations
and returned some very thick, high-grade intercepts which have confirmed robust lithium
mineralisation in the middle of the project, between intersections from the discovery holes.
“With final assay results expected for the remaining four holes shortly, data from all holes will then
be integrated into an updated geological model for Red Mountain with a view to expediting the
process to achieving a maiden Mineral Resource Estimate.”
Figure 1. Drill-hole locations and intersections, and gridded soil sample geochemistry over aerial image.
Suite 6, Level 5, 189 Kent St, Sydney NSW 2000 | GPO Box 2733, Sydney NSW 2001
+61 (0) 2 8046 2799 | admin@astutemetals.com
www.astutemetals.com
About Lithium Carbonate Equivalent (LCE)
Unlike spodumene concentrate, which is a feedstock for a value-added battery product, Lithium
Carbonate is a principal lithium-ion battery product, which may be used directly in battery production
or converted to other battery products such as lithium hydroxide. The Benchmark Mineral Intelligence
Lithium Carbonate China Index priced lithium carbonate product at US$13,710/t6 as of 12 June 2024.
Lithium carbonate is the product of many of the most advanced lithium clay projects around the world,
including Lithium Americas’ (NYSE: LAC) 16.1Mt LCE Thacker Pass Project 3, which is currently under
construction. Accordingly, exploration results for Red Mountain have been reported as both the standard
parts-per-million (ppm) and as % Lithium Carbonate Equivalent (LCE). A full table of assay results is
provided in Appendix 2.
Easting
Northing
RL
Dip
Azimuth
Depth Drilled
(NAD83)
(NAD83)
(m)
(°)
(°)
(m)
RMRC001
637610
4285589
1708
-50
180
182.9
RMRC002
637105
4290201
1694
-50
270
128.0
RMRC003
637105
4290201
1694
-90
-
36.6
RMRC004
637782
4288743
1709
-50
270
137.2
RMRC005
637321
4288194
1687
-50
270
137.2
RMRC006
637534
4288197
1696
-50
270
182.9
RMRC007
637100
4287805
1672
-50
270
152.4
RMRC008
637676
4286218
1709
-50
270
152.4
RMRC009
637667
4285795
1704
-50
270
152.4
RMRC010
636942
4285791
1680
-50
270
121.9
RMRC011
636423
4286202
1650
-50
270
134.1
Drill Hole ID
Table 1. Drill hole collar details
Background
Located in central-eastern Nevada (Figure 2), the Red Mountain Project was staked by Astute in August
2023.
The Project area has broad mapped tertiary lacustrine (lake) sedimentary rocks known locally as the
Horse Camp Formation2. Elsewhere in the state of Nevada, equivalent rocks host large lithium deposits
(see Figure 2) such as Lithium Americas’ (NYSE: LAC) 16.1Mt LCE Thacker Pass Project3, American Battery
Technology Corporation’s (OTCMKTS: ABML) 15.8Mt LCE Tonopah Flats deposit4 and American Lithium
(TSX.V: LI) 9.79Mt LCE TLC Lithium Project5.
After staking was completed, Astute completed an 819-point soil sampling campaign that revealed
strong lithium anomalism in soils, with grades of up to 1,110ppm lithium and a coherent 50ppm+ anomaly
that stretched over 8km strike and up to 2.8km width 2 (Figure 1).
Rock chip sampling, undertaken in several campaigns, revealed the presence of strongly mineralised
claystone, grades of up to 4,150ppm lithium8. As a relatively soft rock type, the claystones at Red Mountain
are ‘recessive’, or lie beneath a typically thin veneer of alluvium.
This recessive nature of the claystone means that more claystone may be present than is immediately
apparent, with the harder rock types presenting as outcrop and the claystone being hidden.
A total of 11 holes were drilled for a combined 1,518m as part of the maiden RC drilling campaign, which
targeted lithium clay mineralisation in zones of strong soil anomalism and/or rock chip anomalism with
a view to understanding the thickness and grade potential of the project (Table 1 and Figure 1).
Results received to date from the campaign confirm the discovery of sub-surface lithium mineralisation
over a broad 4.6km strike length at Red Mountain.
Other attractive Project characteristics include the presence of outcropping claystone host-rocks and
close proximity to infrastructure, including the Project being immediately adjacent to the Grand Army of
the Republic Highway (Route 6), which links the regional cities of Ely with Tonopah.
Suite 6, Level 5, 189 Kent St, Sydney NSW 2000 | GPO Box 2733, Sydney NSW 2001
+61 (0) 2 8046 2799 | admin@astutemetals.com
www.astutemetals.com
Next Steps
The Company is awaiting outstanding assay results for the remaining four drill holes (RMRC008-011)
completed as part of the maiden drill campaign at Red Mountain. Once received, a full interpretation will
be conducted ahead of establishing detailed future plans for the Project.
Figure 2. Location of Astute Lithium Projects, and Nevada lithium deposits.
1 Lithium Carbonate Equivalent wt%(LCE) has been calculated from Lithium parts-per-million (ppm) by the formula LCE = Li (ppm) x 5.323 /10,000
2 ASX: ASE 27 November 2023 ‘Outstanding Rock-Chip Assays at Red Mountain Project’
3 NYSE: LAC 2 November 2022 Feasibility Study NI 43-101 Technical Report for the Thacker Pass Project
4 OTCMKTS: ABML 26 February 2023 ‘Technical Report Summary for The Tonopah Flats Lithium Project, Esmeralda.’
5 TSX.V: LI 17 March 2023 ‘Tonopah Lithium Claims project NI 43-101 technical report – Preliminary Economic Assessment’
6 Source: Benchmark Mineral Intelligence – Lithium Carbonate China Index 12/06/2024
7 ASX: ASE 18 June 2024 ‘Significant Lithium discovery in inaugural drill campaign at Red Mountain Project’
8 ASX: ASE 8 July 2024 ‘High-grade rock chip assays extend prospective lithium horizon at Red Mountain Project, USA’
Suite 6, Level 5, 189 Kent St, Sydney NSW 2000 | GPO Box 2733, Sydney NSW 2001
+61 (0) 2 8046 2799 | admin@astutemetals.com
www.astutemetals.com
Authorisation
This announcement has been authorised for release by the Board of Astute.
More Information
Matt Healy
Executive Director
mhealy@astutemetals.com
+61 (0) 431 683 952
Nicholas Read
Media & Investor Relations
nicholas@readcorporate.com.au
+61 (0) 419 929 046
Competent Persons
The information in this report that relates to Sampling Techniques and Data (Section 1) is based on
information compiled by Mr. Matthew Healy, a Competent Person who is a Member of The Australasian
Institute of Mining and Metallurgy (AusIMM Member number 303597). Mr. Healy is a full-time employee
of Astute Metals NL and is eligible to participate in a Loan Funded Share incentive plan of the Company.
Mr. Healy has sufficient experience that is relevant to the style of mineralisation and type of deposit under
consideration and to the activity being undertaken to qualify as a Competent Person as defined in the
2012 Edition of the ‘Australasian Code for Reporting of Exploration Results, Mineral Resources and Ore
Reserves’. Mr. Healy consents to the inclusion in the report of the matters based on his information in the
form and context in which it appears.
The information in this report that relates to Reporting of Exploration Results (Section 2) is based on
information compiled by Mr. Richard Newport, principal partner of Richard Newport & Associates –
Consultant Geoscientists. Mr. Newport is a member of the Australian Institute of Geoscientists and has
sufficient experience which is relevant to the style of mineralisation and type of deposit under
consideration and to the activity which he is undertaking to qualify as a Competent Person under the
2012 Edition of the ’Australasian Code for Reporting of Exploration Results, Mineral Resources and Ore
Reserves‘. Mr. Newport consents to the inclusion in this announcement of the matters based on his
information in the form and context in which it appears.
Suite 6, Level 5, 189 Kent St, Sydney NSW 2000 | GPO Box 2733, Sydney NSW 2001
+61 (0) 2 8046 2799 | admin@astutemetals.com
www.astutemetals.com
APPENDIX 1 - JORC Code, 2012 Edition – Table 1
Section 1 - Sampling Techniques and Data
Criteria
JORC Code explanation
Commentary
Sampling
techniques
Nature and quality of sampling (e.g. cut
channels, random chips, or specific
specialisedindustry standard measurement
tools appropriate to the minerals under
investigation, such as down hole gamma
sondes, or handheldXRF instruments, etc.).
These examples should not be taken as
limiting the broad meaning of sampling.
5.5” reverse circulation drilling was undertaken
for drill sample collection. Samples were
collected on a 5-foot basis in calico bags,
with a 50% split retained from a rotary cone
splitter for lab assay.
Include reference to measures taken to
ensuresample representivity and the
appropriate calibration of any
measurement tools or systems used.
Samples were air dried on elevated grid mesh
until practical to transport
Aspects of the determination of
mineralisation thatare Material to the Public
Report.
In cases where ‘industry standard’ work has
been done this would be relatively simple
(e.g. ‘reverse circulation drilling was used to
obtain 1 m samples from which 3 kg was
pulverised to produce a 30 g charge for fire
assay’). In other cases, more explanation
may be required, suchas where there is
coarse gold that has inherentsampling
problems. Unusual commodities or
mineralisation types (e.g. submarine
nodules) may warrant disclosure of
detailed information.
Nominal small drill sample was collected for chip
tray records
Claystone hosted lithium deposits are thought to
form as a result of the weathering of
lithium-bearing volcanic glass within
tertiary-aged tuffaceous lacustrine sediments of
the mapped Ts3 unit. Inputs of lithium from
geothermal sources have also been proposed.
Drilling
techniques
Drill type (e.g. core, reverse circulation, openholehammer, rotary air blast, auger, Bangka,
sonic, etc.) and details (e.g. core diameter,
triple or standard tube, depth of diamond tails,
face-sampling bit or other type, whether core
isoriented and if so, by what method, etc.).
5.5” reverse circulation drilling methods
employed. Water was injected to assist with
transport of sample from bit to surface, as required.
Drill sample
recovery
Method of recording and assessing core
andchip sample recoveries and results
assessed.
Sample recovery established by dry sample
weights undertaken by independent
laboratory prior to sample preparation and
analysis
Measures taken to maximise sample
recoveryand ensure representative nature
of the samples.
Whether a relationship exists between
sample recovery and grade and whether
sample bias may have occurred due to
preferential loss/gainof fine/coarse material.
Logging
Whether core and chip samples have
been geologically and geotechnically
logged to alevel of detail to support
appropriate MineralResource estimation,
mining studies and metallurgical studies.
Whether logging is qualitative or
quantitative innature. Core (or costean,
channel, etc.) photography.
Some instances of poor recovery near surface.
Instances of poor recovery are not expected
tomaterially impact interpretation of results
Drill cuttings for entire hole logged for lithology by
company geologists
Logging is qualitative
Photography of material intersections of
claystone taken of relevant chip trays
The total length and percentage of the
relevantintersections logged.
Suite 6, Level 5, 189 Kent St, Sydney NSW 2000 | GPO Box 2733, Sydney NSW 2001
+61 (0) 2 8046 2799 | admin@astutemetals.com
www.astutemetals.com
APPENDIX 1 - JORC Code, 2012 Edition – Table 1
Criteria
JORC Code explanation
Commentary
Subsampling
techniques
and sample
preparation
If core, whether cut or sawn and whether
quarter, half or all core taken.
Samples, 50% split using a rotary cone splitter,
were submitted to ALS Laboratories in Elko for
preparation and analysis.
If non-core, whether riffled, tube sampled,
rotarysplit, etc. and whether sampled wet or
dry.
For all sample types, the nature, quality
and appropriateness of the sample
preparationtechnique.
Quality control procedures adopted for all
sub-sampling stages to maximise
representivityof samples.
Measures taken to ensure that the sampling
isrepresentative of the in-situ material
collected,including for instance results for
field duplicate/second-half sampling.
Quality of
assay data
and
laboratory
tests
Whether sample sizes are appropriate to
thegrain size of the material being sampled.
The nature, quality and appropriateness of
the assaying and laboratory procedures
used and whether the technique is
considered partial ortotal.
For geophysical tools, spectrometers,
handheldXRF instruments, etc., the
parameters used in determining the analysis
including instrument make and model,
reading times, calibrations factors applied
and their derivation, etc.
Nature of quality control procedures
adopted (e.g. standards, blanks, duplicates,
external laboratory checks) and whether
acceptable levels of accuracy (i.e. lack of
bias) and precisionhave been established.
Verification
of sampling
and
assaying
Assay quality was monitored using pulp blanks,
as well as certified reference materials (CRMs)
at a range of lithium grades. Pulp blank results
indicated no material contamination of
samples from sample preparation or during the
analytical process. CRM results were within 3
standard deviations of certified values. No
material systematic bias nor other accuracy
related issues were identified.
The verification of significant intersections by
either independent or alternative company
personnel.
Sample intervals to be assigned a unique
sample identification number prior to sample
despatch
The use of twinned holes.
Lithium-mineralised claystone Certified
Reference Materials (standards), pulp
blanks and coarse blanks to be inserted into
the sample stream at regular intervals to
monitor lab accuracy and potential
contamination during sample prep and
analytical processes
Documentation of primary data, data
entryprocedures, data verification, data
storage (physical and electronic)
protocols.
Discuss any adjustment to assay data.
Location of
data points
Samples analysed by method ME-MS41 which is
an ICP-MS method employing an aqua-regia
digest. Aqua-regia is not considered a ‘total’
digest for many elements however is
considered fit for purpose for lithium and has
been used extensively by other parties
exploring for lithium claystone deposits in the
USA.
Accuracy and quality of surveys used to
locatedrill holes (collar and down-hole
surveys), trenches, mine workings and other
locations used in Mineral Resource
estimation.
Specification of the grid system used.
Quality and adequacy of topographic
control.
Drill collar locations determined using handheld GPS with location reported in NAD83 UTM
Zone 11. Expected hole location accuracy of +/10m
No downhole surveys conducted on drill holes,
with drill rigs lined up by compass and clino
at start of hole
Suite 6, Level 5, 189 Kent St, Sydney NSW 2000 | GPO Box 2733, Sydney NSW 2001
+61 (0) 2 8046 2799 | admin@astutemetals.com
www.astutemetals.com
APPENDIX 1 - JORC Code, 2012 Edition – Table 1
Criteria
JORC Code explanation
Commentary
Data
spacing
and
distribution
Data spacing for reporting of Exploration Results.
Drill spacing is appropriate for early exploration
purposes
Whether the data spacing and distribution is
sufficient to establish the degree of geological
and grade continuity appropriate for the
MineralResource and Ore Reserve estimation
procedure(s) and classifications applied.
5-foot sample interval widely adopted as
standard practice in air drilling in the USA.
Whether sample compositing has been applied.
Orientation
of data in
relation to
geological
structure
Whether the orientation of sampling achieves
unbiased sampling of possible structures and
the extent to which this is known, considering the
deposit type.
Claystone beds are regionally shallow-dipping at
~20° to the east although locally this may vary
across the Project with some evidence of faulting
and potential folding
Sample
security
The measures taken to ensure sample security.
Samples stored at secured yard and shed located
in township of Currant until delivered by staff or
contractors to the ALS lab at Elko, NV
Audits or
reviews
The results of any audits or reviews of
samplingtechniques and data.
Not applicable
If the relationship between the drilling
orientation and the orientation of key
mineralised structures is considered to have
introduced a sampling bias, this should be
assessed and reported if material.
Suite 6, Level 5, 189 Kent St, Sydney NSW 2000 | GPO Box 2733, Sydney NSW 2001
+61 (0) 2 8046 2799 | admin@astutemetals.com
www.astutemetals.com
APPENDIX 1 - JORC Code, 2012 Edition – Table 1
Section 2 - Reporting of Exploration Results
Criteria
JORC Code explanation
Commentary
Mineral
tenement
and land
tenure status
Type, reference name/number, location and
ownership including agreements or material
issues with third parties such as joint ventures,
partnerships, overriding royalties, native title
interests, historical sites, wilderness or national
park and environmental settings.
Red Mountain Claims held in 100% Astute
subsidiary Needles Holdings Inc.
The security of the tenure held at the time of
reporting along with any known impediments to
obtaining a licence to operate in the area.
Exploration
done by
other parties
Acknowledgment and appraisal of exploration
byother parties.
Geology
Deposit type, geological setting and style of
mineralisation.
Claims located on Federal (BLM) Land
Drilling conducted on claims certified by the
Bureau of Land Management (BLM)
No known previous lithium exploration
conducted at Red Mountain
Exploration conducted elsewhere in Nevada by
other explorers referenced in announcement
body text
The principal target deposit style is claystone
hosted lithium mineralisation. Claystone hosted
lithium deposits are thought to form as a result of
the weathering of lithium-bearing volcanic glass
within tertiary-aged tuffaceous lacustrine
sediments of the mapped Ts3 unit.
Lacustrine environments formed as a result of
extensional tectonic regime that produced ‘basin
and range’ topography observed across the
stateof Nevada. Inputs of lithium from
geothermal sources have also been proposed.
Drill hole
Information
A summary of all information material to the
understanding of the exploration results
including a tabulation of the following
information for all Material drill holes:
◦ easting and northing of the drill hole collar
◦ elevation or RL (Reduced Level – elevation
above sea level in metres) of the drill hole
collar
◦ dip and azimuth of the hole
◦ down hole length and interception depth
◦ hole length.
Drillhole locations, orientations and drilled
depths are tabulated in body report
If the exclusion of this information is justified on
the basis that the information is not Material and
this exclusion does not detract from the
understanding of the report, the Competent
Person should clearly explain why this is the case.
Data
aggregation
methods
In reporting Exploration Results, weighting
averaging techniques, maximum and/or
minimum grade truncations (e.g. cutting of high
grades) and cut-off grades are usually Material
and should be stated.
Intersections, where quoted are weighted by
length.
Where aggregate intercepts incorporate short
lengths of high grade results and longer lengths
of low grade results, the procedure used for such
aggregation should be stated and some
typical examples of such aggregations should
be shownin detail.
Low grade mineralisation (300-500ppm Li) is
present outside of the quoted intersections
A 500ppm Li cut-off was used to quote
headline intersections, with allowance for 5ft of
internal dilution by lower grade material.
Intersections are quoted in both lithium ppm and
as wt% Lithium Carbonate Equivalent (LCE). LCE is
calculated as LCE = Li (ppm) x 5.323 / 10,000, as
per industry conventions.
The assumptions used for any reporting of metal
equivalent values should be clearly stated.
Suite 6, Level 5, 189 Kent St, Sydney NSW 2000 | GPO Box 2733, Sydney NSW 2001
+61 (0) 2 8046 2799 | admin@astutemetals.com
www.astutemetals.com
Section 2 Reporting of Exploration Results
Criteria
JORC Code explanation
Commentary
Relationship
between
mineralisation
widths and
intercept
lengths
These relationships are particularly important in
the reporting of Exploration Results.
Insufficient information available due to early
exploration status
If the geometry of the mineralisation with respect
to the drill hole angle is known, its nature should
be reported.
If it is not known and only the down hole lengths
are reported, there should be a clear statement
to this effect (e.g. ‘down hole length, true width
notknown’).
Diagrams
Appropriate maps and sections (with scales)
andtabulations of intercepts should be included
for any significant discovery being reported
These should include, but not be limited to a plan
view of drill hole collar locations and
appropriate sectional views.
Included in ASX announcement
Balanced
reporting
Where comprehensive reporting of all Exploration
Results is not practicable, representative
reporting of both low and high grades and/or
widths should be practiced to avoid misleading
reporting of Exploration Results.
This release describes all relevant information
Other
substantive
exploration
data
Other exploration data, if meaningful and
material, should be reported including (but not
limited to): geological observations;
geophysicalsurvey results; geochemical survey
results; bulk samples – size and method of
treatment; metallurgical test results; bulk
density, groundwater, geotechnical and rock
characteristics; potential deleterious or
contaminating substances.
This release describes all relevant information
Further work
The nature and scale of planned further work
(e.g. tests for lateral extensions or depth
extensions orlarge-scale step-out drilling).
Drill results demonstrate further work at the Red
Mountain project is most likely warranted,
however this will be subject to receipt of the
remaining 4-holes worth of assay results
Diagrams clearly highlighting the areas of
possible extensions, including the main
geological interpretations and future drilling
areas, provided this information is not
commercially sensitive.
Suite 6, Level 5, 189 Kent St, Sydney NSW 2000 | GPO Box 2733, Sydney NSW 2001
+61 (0) 2 8046 2799 | admin@astutemetals.com
www.astutemetals.com
APPENDIX 2 – Red Mountain Drilling
Sample Assay Table
Hole ID
From
(ft)
To (ft)
Li
(ppm)
LCE (%)
Hole ID
From
(ft)
To (ft)
Li
(ppm)
LCE (%)
RMRC004
0
5
1990
1.06
RMRC004
225
230
1200
0.64
RMRC004
5
10
1725
0.92
RMRC004
230
235
1725
0.92
RMRC004
10
15
1620
0.86
RMRC004
235
240
1925
1.02
RMRC004
15
20
987
0.53
RMRC004
240
245
1490
0.79
RMRC004
20
25
558
0.30
RMRC004
245
250
1135
0.60
RMRC004
25
30
349
0.19
RMRC004
250
255
1315
0.70
RMRC004
30
35
668
0.36
RMRC004
255
260
1520
0.81
RMRC004
35
40
952
0.51
RMRC004
260
265
1445
0.77
RMRC004
40
45
808
0.43
RMRC004
265
270
554
0.29
RMRC004
45
50
445
0.24
RMRC004
270
275
1235
0.66
RMRC004
50
55
348
0.19
RMRC004
275
280
1925
1.02
RMRC004
55
60
745
0.40
RMRC004
280
285
1685
0.90
RMRC004
60
65
1475
0.79
RMRC004
285
290
771
0.41
RMRC004
65
70
1465
0.78
RMRC004
290
295
1665
0.89
RMRC004
70
75
714
0.38
RMRC004
295
300
2540
1.35
RMRC004
75
80
677
0.36
RMRC004
300
305
1680
0.89
RMRC004
80
85
1205
0.64
RMRC004
305
310
989
0.53
RMRC004
85
90
1055
0.56
RMRC004
310
315
971
0.52
RMRC004
90
95
1515
0.81
RMRC004
315
320
311
0.17
RMRC004
95
100
1465
0.78
RMRC004
320
325
741
0.39
RMRC004
100
105
1105
0.59
RMRC004
325
330
510
0.27
RMRC004
105
110
1245
0.66
RMRC004
330
335
169
0.09
RMRC004
110
115
1465
0.78
RMRC004
335
340
147.5
0.08
RMRC004
115
120
1310
0.70
RMRC004
340
345
332
0.18
RMRC004
120
125
1325
0.71
RMRC004
345
350
133.5
0.07
RMRC004
125
130
895
0.48
RMRC004
350
355
139
0.07
RMRC004
130
135
686
0.37
RMRC004
355
360
259
0.14
RMRC004
135
140
1035
0.55
RMRC004
360
365
332
0.18
RMRC004
140
145
1625
0.86
RMRC004
365
370
349
0.19
RMRC004
145
150
1995
1.06
RMRC004
370
375
290
0.15
RMRC004
150
155
2000
1.06
RMRC004
375
380
269
0.14
RMRC004
155
160
1785
0.95
RMRC004
380
385
338
0.18
RMRC004
160
165
1565
0.83
RMRC004
385
390
514
0.27
RMRC004
165
170
1380
0.73
RMRC004
390
395
460
0.24
RMRC004
170
175
1470
0.78
RMRC004
395
400
287
0.15
RMRC004
175
180
850
0.45
RMRC004
400
405
393
0.21
RMRC004
180
185
752
0.40
RMRC004
405
410
84.4
0.04
RMRC004
185
190
737
0.39
RMRC004
410
415
93.2
0.05
RMRC004
190
195
1065
0.57
RMRC004
415
420
76.2
0.04
RMRC004
195
200
1170
0.62
RMRC004
420
425
159.5
0.08
RMRC004
200
205
1350
0.72
RMRC004
425
430
54.3
0.03
RMRC004
205
210
736
0.39
RMRC004
430
435
52.8
0.03
RMRC004
210
215
921
0.49
RMRC004
435
440
85.1
0.05
RMRC004
215
220
637
0.34
RMRC004
440
445
153
0.08
RMRC004
220
225
712
0.38
RMRC004
445
450
116
0.06
Suite 6, Level 5, 189 Kent St, Sydney NSW 2000 | GPO Box 2733, Sydney NSW 2001
+61 (0) 2 8046 2799 | admin@astutemetals.com
www.astutemetals.com
APPENDIX 2 – Red Mountain Drilling
Sample Assay Table
Hole ID
From
(ft)
To (ft)
Li
(ppm)
LCE (%)
Hole ID
From
(ft)
To (ft)
RMRC005
RMRC005
0
5
54.3
0.03
5
10
360
0.19
RMRC005
10
15
RMRC005
15
20
742
0.39
748
0.40
RMRC005
20
25
RMRC005
25
30
853
547
RMRC005
30
RMRC005
35
35
40
RMRC005
40
RMRC005
45
45
50
RMRC005
RMRC005
50
55
RMRC005
RMRC005
RMRC005
RMRC005
RMRC005
225
230
1410
0.75
RMRC005
230
235
1165
0.62
RMRC005
235
240
1050
0.56
RMRC005
240
245
851
0.45
0.45
RMRC005
245
250
1020
0.54
0.29
RMRC005
250
255
1115
0.59
244
0.13
RMRC005
255
260
1260
0.67
580
0.31
RMRC005
260
265
1065
0.57
550
0.29
RMRC005
265
270
1280
0.68
510
0.27
RMRC005
270
275
1315
0.70
55
449
0.24
RMRC005
275
280
1755
0.93
60
570
0.30
RMRC005
280
285
1490
0.79
60
65
888
0.47
RMRC005
285
290
1535
0.82
65
70
992
0.53
RMRC005
290
295
1100
0.59
70
75
1025
0.55
RMRC005
295
300
1460
0.78
75
80
706
0.38
RMRC005
300
305
1820
0.97
RMRC005
80
85
650
0.35
RMRC005
305
310
1470
0.78
RMRC005
85
90
551
0.29
RMRC005
310
315
1480
0.79
RMRC005
90
95
546
0.29
RMRC005
315
320
1530
0.81
RMRC005
95
100
397
0.21
RMRC005
320
325
1675
0.89
RMRC005
100
105
485
0.26
RMRC005
325
330
2090
1.11
RMRC005
105
110
505
0.27
RMRC005
330
335
2340
1.25
RMRC005
110
115
458
0.24
RMRC005
335
340
1670
0.89
RMRC005
115
120
544
0.29
RMRC005
340
345
1440
0.77
RMRC005
120
125
425
0.23
RMRC005
345
350
1680
0.89
RMRC005
125
130
553
0.29
RMRC005
350
355
1565
0.83
RMRC005
130
135
566
0.30
RMRC005
355
360
1160
0.62
RMRC005
135
140
421
0.22
RMRC005
360
365
1150
0.61
RMRC005
140
145
483
0.26
RMRC005
365
370
778
0.41
RMRC005
145
150
287
0.15
RMRC005
370
375
758
0.40
RMRC005
150
155
299
0.16
RMRC005
375
380
84
Share your feedback
Discover