Announcement PDF ASX / Media Release 16 December 2025 Suite 116 Level 1, 165-167 Phillip St Sydney, NSW 2000 GPO Box 2733, Sydney NSW 2001 P. +61 (0) 2 8046 2799 | E. admin@venariminerals.com venariminerals.com Exceptional wide, high-grade lithium intersection reinforces quality and scale of the Red Mountain lithium discovery 109.7m of lithium mineralisation includes the highest-grade intercept to date, confirming the strong tenor of the Northern Area of the deposit Highlights • Highest-grade lithium intersection received to date from the Red Mountain Project returned from the October drilling campaign. • Drill-hole RMRC013 intersected a combined 109.7m of lithium mineralisation (combined estimated true width ‘ETW’ of 87.8m), including: o 77.7m (ETW 62.2m) @ 2,440ppm Li from 76.2m, including: ▪ 24.4m (ETW 19.5m) @ 4,270ppm Li from 97.5m; and ▪ 7.6m (ETW 6.1m) @ 3,080ppm Li from 132.6m; and o 4.6m (ETW 3.7m) @ 2,610ppm Li from 59.4m; and o 7.6m (ETW 6.1m) @ 1,460ppm Li from 170.7m. • Result firms up the tenor of mineralisation down-dip from high-grade hole RMDD003, which intersected 32.4m @ 3,260ppm Li from 57.2m, 13.8m @ 1,330ppm Li from 39.6m and 23.3m @ 1,610ppm from 94.4m to end-of-hole. • Assay results remain outstanding for three holes, expected in the coming fortnight, which will pave the way for a maiden Mineral Resource Estimate (MRE) for Red Mountain in early 2026. Venari Minerals NL (ASX: VMS) (“Venari”, “the Company” or “VMS”) is pleased to report assay results for RMRC013, which was drilled in the northern area of the 100%-owned Red Mountain Project in Nevada, USA, as part of a 13-hole Reverse Circulation (RC) drilling campaign completed in October 2025. Drill-hole RMRC013 was designed to test for mineralisation down-dip of the high-grade lithium intersected in previous hole RMDD003 (Figures 2 and 3). RMRC013 was highly successful, intersecting the highest-grade mineralisation to date at the Project and extending the drill-defined extent of mineralisation to a depth of approximately 150 metres below surface. The exceptionally high-grade mineralisation in the hole, which includes 12individual 1.5m (5ft) samples grading in excess of 4,000ppm Li, is expected to firm up a high-grade core to the northern part of the Project, which includes several other holes that intersected high-grade mineralisation – RMDD003, RMDD002, RMRC014 and RMRC015. Assays remain outstanding for three holes from the campaign. 2 newmurchgold.com.a Venari Chairman, Tony Leibowitz, said: “The results from hole RMRC013 are quite exceptional and show the Tier-1 scale and quality of the Red Mountain Project. Importantly, this hole has strengthened and expanded the strategically important high-grade core in the Northern Area of the deposit. The October drilling campaign has been very successful, and we are looking forward to seeing the results of the final three holes, which are expected in the coming fortnight. As a result of the delays experienced with assay laboratories in North America, the maiden MRE for Red Mountain will now be delivered in Q1 2026. Against the backdrop of rapidly improving sentiment in the lithium market, we are looking forward to achieving this milestone and illustrating the enormous value in this project to our shareholders.” Results Intersections for RMRC013 are as follows: • 10.7m down-hole (estimated true width ‘ETW’ 8.6m) @ 1,690ppm Li / 0.90% Lithium Carbonate Equivalent (LCE) from 57.9m, including: o 4.6m (ETW 3.7m) @ 2,610ppm Li / 1.39% LCE from 59.4m; • 77.7m down-hole (ETW 62.2m) @ 2,440ppm Li / 1.3% LCE from 76.2m, including: o 24.4m (ETW 19.5m) @ 4,270ppm Li / 2.27% LCE from 97.5m, and o 7.6m (ETW 6.1m) @ 3,080ppm Li / 1.64% LCE from 132.6m; • 21.3m downhole (ETW 17m) @ 966ppm Li / 0.51% LCE from 170.7m, including: o 7.6m (ETW 6.1m) @ 1,460ppm Li / 0.78% LCE from 170.7m; Figure 1. RMRC013-RMDD003 preliminary interpretative cross-section with down-hole lithium geochemistry. Hole ID Easting (NAD83) Northing (NAD83) RL (m) Azimuth (°) Dip (°) Depth (m) RMRC013 637122 4291198.1 1707.7 90.5 -70 210.3 Table 1. Drill collar details 3 newmurchgold.com.a Background Located in central-eastern Nevada (Figure 3), adjacent to the Grand Army of the Republic Highway (Route 6), the Red Mountain Project was staked by Venari in August 2023. Figure 2. Red Mountain north and central (down-hole) drill intersections over gridded soil geochemistry image. 4 newmurchgold.com.a The Project area has broad mapped tertiary lacustrine (lake) sedimentary rocks known locally as the Horse Camp Formation. Elsewhere in Nevada, equivalent rocks host large lithium deposits (see Figure 3) such as Lithium Americas’ (NYSE: LAC) 62.1Mt LCE Thacker Pass Project3 and American Battery Technology Corporation’s (NASDAQ: ABAT) 15.8Mt LCE Tonopah Flats deposit4 . Prior to the most recent campaign, a total of 19 drill holes had been completed at the project to date for a combined 3,336m of drilling across three campaigns. These campaigns have been highly successful, intersecting strong lithium mineralisation in almost every hole6 . Scoping leachability testwork on mineralised material from Red Mountain indicates high leachability of lithium of up to 98%, varying with temperature, acid strength and leaching duration5 , and beneficiation test- work has indicated the potential to upgrade the Red Mountain mineralisation1,2,7 . Figure 3. Location of Red Mountain and other Nevada Lithium projects. 5 newmurchgold.com.a References 1 – ASX: ASE, 22 April 2025, Beneficiation testwork successfully upgrades mineralisation at Red Mountain 2 - ASX: ASE, 10 June 2025, Beneficiation Delivers 4,480ppm Lithium Clay Concentrate at Red Mountain 3 - NYSE: LAC, 31 December 2024, Updated NI 43-101 Technical Report for the Thacker Pass Project 4 - OTCMKTS: ABML, 26 February 2023, Technical Report Summary for The Tonopah Flats Lithium Project, Esmeralda 5 - ASX: ASE, 9 December 2024, Positive initial metallurgical results from Red Mountain 6 - ASX: ASE, 25 June 2025, Exceptional Drill-hole Intersects combined 170m of Lithium Mineralisation at Red Mountain 7 - ASX: ASE, 3 September 2025, Outstanding lithium anomalism in surface sampling at Red Mountain Extension 8 – ASX: VMS, 15 October 2025, Metallurgical test-work delivers 132% upgrade to lithium mineralisation at Red Mountain, Nevada 9 – ASX: VMS, 17 November 2025, Initial Red Mountain Assays confirm High-grade Lithium 10 – Lithium Carbonate Equivalent wt%(LCE) has been calculated from Lithium parts-per-million (ppm) by the formula LCE = Li (ppm) x 5.323 /10,000 11 – ASX: ASE, 15 May 2025, Exceptional lithium intercept extends Red Mountain discovery further to the North Authorisation This announcement has been authorised for release by the Board of Venari Minerals NL. Join the Venari Minerals Investor Hub Engage with Venari Minerals through accessing reports, presentations, interviews and other Company content. Ask Questions and browse responses to other investors’ questions. Click here and follow the prompts to sign up. For further information, please contact: Matthew Healy Nicholas Read Executive Director & CEO Media & Investor Relations T: +61 (0) 431 683 952 T: +61 (0) 419 929 046 E: matt@venariminerals.com E: nicholas@readcorporate.com.au Competent Persons The information in this report that relates to Sampling Techniques and Data (Section 1) is based on information compiled by Mr. Matthew Healy, a Competent Person who is a Member of The Australasian Institute of Mining and Metallurgy (AusIMM Member number 303597). Mr Healy is a full-time employee of Venari Minerals NL and is eligible to participate in share-based incentive schemes of the Company. Mr Healy has sufficient experience that is relevant to the style of mineralisation and type of deposit under consideration and to the activity being undertaken to qualify as a Competent Person as defined in the 2012 Edition of the ‘Australasian Code for Reporting of Exploration Results, Mineral Resources and Ore Reserves’. Mr Healy consents to the inclusion in the report of the matters based on his information in the form and context in which it appears. The information in this report that relates to Reporting of Exploration Results (Section 2) is based on information compiled by Mr. Richard Newport, principal partner of Richard Newport & Associates – Consultant Geoscientists. Mr. Newport is a member of the Australian Institute of Geoscientists and has sufficient experience which is relevant to the style of mineralisation and type of deposit under 6 newmurchgold.com.a consideration and to the activity which he is undertaking to qualify as a Competent Person under the 2012 Edition of the ’Australasian Code for Reporting of Exploration Results, Mineral Resources and Ore Reserves‘. Mr. Newport consents to the inclusion in this announcement of the matters based on his information in the form and context in which it appears. 7 newmurchgold.com.a APPENDIX 1 - JORC Code, 2012 Edition – Table 1 SECTION 1 - SAMPLING TECHNIQUES AND DATA Criteria JORC Code explanation Commentary Sampling techniques Nature and quality of sampling (e.g. cut channels, random chips, or specific specialised industry standard measurement tools appropriate to the minerals under investigation, such as down hole gamma sondes, or handheld XRF instruments, etc.). These examples should not be taken as limiting the broad meaning of sampling. Include reference to measures taken to ensure sample representivity and the appropriate calibration of any measurement tools or systems used. Aspects of the determination of mineralisation that are Material to the Public Report. In cases where ‘industry standard’ work has been done this would be relatively simple (e.g. ‘reverse circulation drilling was used to obtain 1 m samples from which 3 kg was pulverised to produce a 30 g charge for fire assay’). In other cases, more explanation may be required, such as where there is coarse gold that has inherent sampling problems. Unusual commodities or mineralisation types (e.g. submarine nodules) may warrant disclosure of detailed information. 5.5” reverse circulation drilling was undertaken for drill sample collection. Samples were collected on a 5-foot basis in calico bags, with approximate 30% split retained from a rotary cone splitter for lab assay. Water was injected throughout the hole. Nominal small drill sample was collected for chip tray records Samples were air dried on elevated grid mesh until practical to transport Claystone hosted lithium deposits are thought to form as a result of the weathering of lithium-bearing volcanic glass within tertiary-aged tuffaceous lacustrine sediments of the mapped Ts3 unit. Inputs of lithium from geothermal sources have also been proposed. Drilling techniques Drill type (e.g. core, reverse circulation, open-hole hammer, rotary air blast, auger, Bangka, sonic, etc.) and details (e.g. core diameter, triple or standard tube, depth of diamond tails, face- sampling bit or other type, whether core is oriented and if so, by what method, etc.). 5.5” Reverse Circulation drilling methods employed using a cross- over sub immediately behind the hammer. 8 newmurchgold.com.a Drill sample recovery Method of recording and assessing core and chip sample recoveries and results assessed. Measures taken to maximise sample recovery and ensure representative nature of the samples. Whether a relationship exists between sample recovery and grade and whether sample bias may have occurred due to preferential loss/gain of fine/coarse material. Sample recoveries to be measured by dry sample weight at the laboratory prior to assay. Some instances of poor recovery noted. Instances of poor recovery are not expected to materially impact interpretation of results Logging Whether core and chip samples have been geologically and geotechnically logged to a level of detail to support appropriate Mineral Resource estimation, mining studies and metallurgical studies. Whether logging is qualitative or quantitative in nature. Core (or costean, channel, etc.) photography. The total length and percentage of the relevant intersections logged. Drill cuttings of entire hole logged for lithology by consultant geologist Logging is qualitative with selective quantitative logging (e.g. quartz veining) Chip tray photography undertaken on all full drill holes Sub- sampling techniques and sample preparation If core, whether cut or sawn and whether quarter, half or all core taken. If non-core, whether riffled, tube sampled, rotarysplit, etc. and whether sampled wet or dry. For all sample types, the nature, quality and appropriateness of the sample preparationtechnique. Quality control procedures adopted for all sub-sampling stages to maximise representivityof samples. Measures taken to ensure that the sampling isrepresentative of the in-situ material collected,including for instance results for field duplicate/second-half sampling. Samples 30% split using a rotary cone splitter and submitted to ALS Laboratories in Reno for preparation and analysis. 9 newmurchgold.com.a Quality of assay data and laboratory tests Whether sample sizes are appropriate to thegrain size of thematerial being sampled. The nature, quality and appropriateness of the assaying and laboratory procedures used andwhether the technique is considered partial ortotal. For geophysical tools, spectrometers, handheldXRF instruments, etc., the parameters used in determining the analysis including instrument make and model, reading times, calibrations factors applied and theirderivation, etc. Nature of quality control procedures adopted (e.g. standards, blanks, duplicates, external laboratory checks) and whether acceptable levels of accuracy (i.e. lack of bias) and precision have been established. Samples analysed by method ME- MS61 which is an ICP-MS method employing a 4-acid digest. A comparison of aqua-regia and 4- acid digests was undertaken for Red Mountain mineralisation, with no material difference in lithium results identified. Assay quality was monitored using pulp blanks, as well as certified reference materials (CRMs) at a range of lithium grades. Pulp blank results indicated no material contamination of samples from sample preparation or during the analytical process. CRM results were within 3 standard deviations of certified values. No material systematic bias nor other accuracy related issues were identified. Verification of sampling and assaying The verification of significant intersections byeither independent or alternative company personnel. The use of twinned holes. Documentation of primary data, data entryprocedures, data verification, data storage(physical and electronic) protocols. Discuss any adjustment to assay data. Sample intervals assigned a unique sample identification number prior to sample despatch Lithium-mineralised claystone Certified Reference Materials (standards), pulp blanks and coarse blanks inserted into the sample stream at regular intervals to monitor lab accuracy and potential contamination during sample prep and analysis. Location of data points Accuracy and quality of surveys used to locatedrill holes (collar and down-hole surveys), trenches, mine workings and other locations used in Mineral Resource estimation. Specification of the grid system used. Quality and adequacy of topographic control. Drill collar locations determined using hand held GPS with location reported in NAD83 UTM Zone 11 with expected accuracy of +/- 10m Downhole surveys conducted on drill holes at nominal 100ft intervals, with drill rigs lined up by compass and clino at start of hole. 10 newmurchgold.com.a APPENDIX 1 - JORC Code, 2012 Edition – Table 1 Criteria JORC Code explanation Commentary Data spacing and distribution Data spacing for reporting of Exploration Results. Whether the data spacing and distribution is sufficient to establish the degree of geological and grade continuity appropriate for the Mineral Resource and Ore Reserve estimation procedure(s) and classifications applied. Whether sample compositing has been applied. Drill spacing appropriate for early stage exploration Orientation of data in relation to geological structure Whether the orientation of sampling achieves unbiased sampling of possible structures and the extent to which this is known, considering the deposit type. If the relationship between the drilling orientation and the orientation of key mineralised structures is considered to have introduced a sampling bias, this should be assessed and reported if material. Claystone beds are regionally shallow-dipping at ~20°-45° to the east and varying locally across the Project with some evidence of faulting and potential folding. Most holes are drilled approximately perpendicular to bedding, with some having a down- dip component due to drill pad location and allowable disturbance limitations. These holes have estimated true width intersections included in the body release as well as down hole intersections. Sample security The measures taken to ensure sample security. Samples stored at secured yard and shed located in township of Currant until delivered by staff or contractors to the ALS labs Audits or reviews The results of any audits or reviews of sampling techniques and data. Not applicable 11 newmurchgold.com.a APPENDIX 1 - JORC Code, 2012 Edition – Table 1 SECTION 2 - REPORTING OF EXPLORATION RESULTS Criteria JORC Code explanation Commentary Mineral tenement and land tenure status Type, reference name/number, location and ownership including agreements or material issues with third parties such as joint ventures, partnerships, overriding royalties, native title interests, historical sites, wilderness or national park and environmental settings. The security of the tenure held at the time of reporting along with any known impediments to obtaining a licence to operate in the area. Red Mountain Claims held in 100% subsidiary Needles Holdings Inc. Claims located on Federal (BLM) Land Drilling conducted on claims certified by the Bureau of Land Management (BLM) Exploration done by other parties Acknowledgment and appraisal of exploration by other parties. No known previous lithium exploration conducted at Red Mountain. Exploration conducted elsewhere in Nevada by other explorers referenced in body text. Geology Deposit type, geological setting and style of mineralisation. The principal target deposit style is claystone hosted lithium mineralisation. Claystone hosted lithium deposits are thought to form as a result of the weathering of lithium- bearing volcanic glass within tertiary- aged tuffaceous lacustrine sediments of the mapped Ts3 unit. Lacustrine environments formed as a result of extensional tectonic regime that produced ‘basin and range’ topography observed across the state of Nevada. Inputs of lithium from geothermal sources have also been proposed. 12 newmurchgold.com.a Drill hole Information A summary of all information material to the understanding of the exploration results including a tabulation of the following information for all Material drill holes: • easting and northing of the drill hole collar • elevation or RL (Reduced Level – elevation above sea level in metres) of the drill hole collar • dip and azimuth of the hole • down hole length and interception depth • hole length. If the exclusion of this information is justified on the basis that the information is not Material and this exclusion does not detract from the understanding of the report, the Competent Person should clearly explain why this is the case. Drill hole information is tabulated in body text and/or shown in relevant maps. Data Aggregation Methods In reporting Exploration Results, weighting averaging techniques, maximum and/or minimum grade truncations (e.g. cutting of high grades) and cut-off grades are usually Material and should be stated. Where aggregate intercepts incorporate short lengths of high-grade results and longer lengths of low-grade results, the procedure used for such aggregation should be stated and some typical examples of such aggregations should be shown in detail. The assumptions used for any reporting of metal equivalent values should be clearly stated Intersections, where quoted are weighted by length. Lengths originally recorded in feet are quoted to the nearest 10cm. Estimates of ‘true width’ intersections given where drilling is interpreted to have a significant down-dip component. Rounding is conducted to 3 significant figures A 500ppm Li cut-off was used to quote headline intersections, with allowance for 10ft of internal dilution by lower grade material. Low grade mineralisation (300-500ppm Li) is present outside of the quoted intersections Intersections are quoted in both lithium ppm and as wt% Lithium Carbonate Equivalent (LCE). LCE is calculated as LCE = Li (ppm) x 5.323 / 10,000, as per industry conventions 13 newmurchgold.com.a Section 2 Reporting of Exploration Results Criteria JORC Code explanation Commentary Relationship between mineralisatio n widths and intercept lengths These relationships are particularly important in the reporting of Exploration Results. If the geometry of the mineralisation with respect to the drill hole angle is known, its nature should be reported. If it is not known and only the down hole lengths are reported, there should be a clear statement to this effect (e.g. ‘down hole length, true width not known’). Insufficient information available due to early exploration status, although interpretation to date is that intersections in this hole approximate true width unless otherwise indicated. Diagrams Appropriate maps and sections (with scales) and tabulations of intercepts should be included for any significant discovery being reported These should include, but not be limited to a plan view of drill hole collar locations and appropriate sectional views. Included in ASX announcement. Balanced reporting Where comprehensive reporting of all Exploration Results is not practicable, representative reporting of both low and high grades and/or widths should be practiced to avoid misleading reporting of Exploration Results. This release describes all relevant information Other substantive exploration data Other exploration data, if meaningful and material, should be reported including (but not limited to): geological observations; geophysical survey results; geochemical survey results; bulk samples – size and method of treatment; metallurgical test results; bulk density, groundwater, geotechnical and rock characteristics; potential deleterious or contaminating substances. This release describes all relevant information Further work The nature and scale of planned further work (e.g. tests for lateral extensions or depth extensions or large-scale step-out drilling). The Red Mountain lithium project is emerging as a significant lithium discovery in Nevada and is being advanced toward a maiden Mineral Resource Estimate later this year. It is the Company’s intent to advance the project beyond this to technical studies. 14 newmurchgold.com.a APPENDIX 2 – Red Mountain Drilling Sample Assay Table Hole ID From (ft) To (ft) Li (ppm) LCE (%) Hole ID From (ft) To (ft) Li (ppm) LCE (%) RMRC013 0 5 10.6 0.01 RMRC013 210 215 1010 0.54 RMRC013 5 10 22.8 0.01 RMRC013 215 220 830 0.44 RMRC013 10 15 102 0.05 RMRC013 220 225 809 0.43 RMRC013 15 20 286 0.15 RMRC013 225 230 174 0.09 RMRC013 20 25 969 0.52 RMRC013 230 235 67.5 0.04 RMRC013 25 30 523 0.28 RMRC013 235 240 45.1 0.02 RMRC013 30 35 347 0.18 RMRC013 240 245 242 0.13 RMRC013 35 40 264 0.14 RMRC013 245 250 300 0.16 RMRC013 40 45 163 0.09 RMRC013 250 255 1100 0.59 RMRC013 45 50 77.5 0.04 RMRC013 255 260 1150 0.61 RMRC013 50 55 98.7 0.05 RMRC013 260 265 1725 0.92 RMRC013 55 60 87.6 0.05 RMRC013 265 270 2160 1.15 RMRC013 60 65 86.6 0.05 RMRC013 270 275 2630 1.40 RMRC013 65 70 74 0.04 RMRC013 275 280 2500 1.33 RMRC013 70 75 106 0.06 RMRC013 280 285 1865 0.99 RMRC013 75 80 86.7 0.05 RMRC013 285 290 1980 1.05 RMRC013 80 85 46.3 0.02 RMRC013 290 295 1010 0.54 RMRC013 85 90 54.1 0.03 RMRC013 295 300 127.5 0.07 RMRC013 90 95 35.9 0.02 RMRC013 300 305 388 0.21 RMRC013 95 100 29.6 0.02 RMRC013 305 310 2750 1.46 RMRC013 100 105 40.7 0.02 RMRC013 310 315 1475 0.79 RMRC013 105 110 78.9 0.04 RMRC013 315 320 2130 1.13 RMRC013 110 115 61.2 0.03 RMRC013 320 325 4170 2.22 RMRC013 115 120 55.1 0.03 RMRC013 325 330 5240 2.79 RMRC013 120 125 84.9 0.05 RMRC013 330 335 5550 2.95 RMRC013 125 130 53.2 0.03 RMRC013 335 340 4900 2.61 RMRC013 130 135 84.2 0.04 RMRC013 340 345 4520 2.41 RMRC013 135 140 98.1 0.05 RMRC013 345 350 4750 2.53 RMRC013 140 145 88.7 0.05 RMRC013 350 355 5090 2.71 RMRC013 145 150 99.7 0.05 RMRC013 355 360 3960 2.11 RMRC013 150 155 204 0.11 RMRC013 360 365 5250 2.79 RMRC013 155 160 179.5 0.10 RMRC013 365 370 4670 2.49 RMRC013 160 165 211 0.11 RMRC013 370 375 2240 1.19 RMRC013 165 170 422 0.22 RMRC013 375 380 2130 1.13 RMRC013 170 175 531 0.28 RMRC013 380 385 4030 2.15 RMRC013 175 180 142 0.08 RMRC013 385 390 4560 2.43 RMRC013 180 185 107 0.06 RMRC013 390 395 3270 1.74 RMRC013 185 190 69.5 0.04 RMRC013 395 400 4010 2.13 RMRC013 190 195 1310 0.70 RMRC013 400 405 1295 0.69 RMRC013 195 200 3010 1.60 RMRC013 405 410 581 0.31 RMRC013 200 205 2600 1.38 RMRC013 410 415 695 0.37 RMRC013 205 210 2230 1.19 RMRC013 415 420 550 0.29 15 newmurchgold.com.a Hole ID From (ft) To (ft) Li (ppm) LCE (%) Hole ID From (ft) To (ft) Li (ppm) LCE (%) RMRC013 420 425 247 0.13 RMRC013 630 635 370 0.20 RMRC013 425 430 702 0.37 RMRC013 635 640 254 0.14 RMRC013 430 435 1010 0.54 RMRC013 640 645 405 0.22 RMRC013 435 440 3070 1.63 RMRC013 645 650 296 0.16 RMRC013 440 445 3730 1.99 RMRC013 650 655 163 0.09 RMRC013 445 450 3170 1.69 RMRC013 655 660 139.5 0.07 RMRC013 450 455 3010 1.60 RMRC013 660 665 592 0.32 RMRC013 455 460 2420 1.29 RMRC013 665 670 374 0.20 RMRC013 460 465 1385 0.74 RMRC013 670 675 216 0.11 RMRC013 465 470 2180 1.16 RMRC013 675 680 288 0.15 RMRC013 470 475 1140 0.61 RMRC013 680 685 1075 0.57 RMRC013 475 480 1400 0.75 RMRC013 685 690 447 0.24 RMRC013 480 485 1250 0.67 RMRC013 485 490 818 0.44 RMRC013 490 495 2900 1.54 RMRC013 495 500 907 0.48 RMRC013 500 505 703 0.37 RMRC013 505 510 313 0.17 RMRC013 510 515 366 0.19 RMRC013 515 520 424 0.23 RMRC013 520 525 678 0.36 RMRC013 525 530 508 0.27 RMRC013 530 535 411 0.22 RMRC013 535 540 345 0.18 RMRC013 540 545 868 0.46 RMRC013 545 550 267 0.14 RMRC013 550 555 200 0.11 RMRC013 555 560 262 0.14 RMRC013 560 565 1035 0.55 RMRC013 565 570 2100 1.12 RMRC013 570 575 1825 0.97 RMRC013 575 580 1235 0.66 RMRC013 580 585 1085 0.58 RMRC013 585 590 865 0.46 RMRC013 590 595 589 0.31 RMRC013 595 600 375 0.20 RMRC013 600 605 1155 0.61 RMRC013 605 610 603 0.32 RMRC013 610 615 390 0.21 RMRC013 615 620 305 0.16 RMRC013 620 625 1090 0.58 RMRC013 625 630 870 0.46