Expansion of Lithium Footprint in Nevada
Released
Released
Announcement PDF
18 September 2023
ASTUTE EXPANDS NEVADA LITHIUM FOOTPRINT
High-grade soil samples of up to 1,640ppm lithium at newly staked
Cobre Project, with Red Mountain Project also added to the portfolio
Key Highlights
•
Soil sample results at recently staked Cobre Project grade
up to 1,640ppm lithium.
•
Newly staked Red Mountain Project is located 195km
north-east of the Polaris and Altair Projects.
•
Both project areas contain mapped Ts3 sedimentary host
rocks prospective for lithium clay mineralisation.
•
Exploration drill holes to be permitted at Cobre ahead of a
planned Q4 drilling campaign.
•
Soil sampling campaign planned for Red Mountain.
Astute Metals NL (ASX: ASE) (“ASE”, “Astute” or “the Company”) is pleased to advise that it continues to
advance its lithium exploration strategy in Nevada, USA, with the successful addition of two new highly
prospective lithium exploration areas and encouraging results from a fast-tracked soil sampling
program at the newly staked Cobre Project.
Astute Executive Chairman, Tony Leibowitz, said:
“We are continuing to build our strategic presence within the USA’s lithium exploration ‘hot-spot’ in
Nevada. The successful staking of the Cobre and Red Mountain Projects marks another step in our
systematic and patient approach to building a long-term battery materials business in North
America. A fast-tracked soil sampling program has returned highly encouraging results from
Cobre, vindicating our approach and providing a solid foundation for upcoming drilling. In addition,
the Company will actively engage for expansion opportunities to further enhance the overall
potential of this Project.”
Background
The Company has been working to actively expand its lithium exploration footprint since the staking of
the Polaris and Alair Projects in Q1 this year1. Following a desktop project generation exercise, the
Company conducted reconnaissance and surface sampling campaigns over a number of areas
considered prospective for lithium claystone deposits based on mapped geology and historical surface
sample data sourced from the US Geological Survey. This work resulted in the identification of two areas
that warranted staking of claims. The first, Cobre, was staked during August, and the Company is in the
process of completing the staking process at the second project, Red Mountain.
Cobre Soil Sampling
Following the recent staking of the Cobre Project, the Company conducted a soil sampling program in
order to detect the presence of lithium in soil. Lithium in the soil may indicate the presence of lithiumbearing claystone.
The Company collected a total of 229 samples covering the staked project area on a 400m x 100m
sampling grid pattern, mostly overlaying mapped outcropping tertiary sedimentary (Ts3) host rocks,
considered prospective for lithium claystone mineralisation.
Suite 6, Level 5, 189 Kent St, Sydney NSW 2000 | GPO Box 2733, Sydney NSW 2001
+61 (0) 2 8046 2799 | admin@astutemetals.com
www.astutemetals.com
The results returned to the Company were highly encouraging, with a peak value of 1,640ppm lithium,
and 23 results of over 100ppm lithium, which is considered highly anomalous (Figure 1). The lithium-insoil geochemistry, which highlights the prospective nature of the Project, will be used to inform drill
locations for permitting and subsequent drill testing. Full results can be found in Appendix 1.
Figure 1. Soil sample lithium geochemistry, Cobre Project claims outline and aerial image.
Red Mountain Project Staking
The Company has recently completed physical staking of a project in eastern central Nevada given the
name ‘Red Mountain’ (Figure 2). The Project is located 195 kilometres from the Polaris and Altair Projects.
The Project was an area of interest to the Company based on the presence of mapped Ts3 sedimentary
rocks, known to host lithium deposits elsewhere in the state of Nevada, and anomalous lithium
geochemistry in two historical stream sediment samples collected in 1980 as part of the National
Uranium Resource Evaluation (NURE) program2. The samples were re-assayed for a full suite of elements,
with the latest revised data publicly released in 2021. These results included analysis for lithium2.
Suite 6, Level 5, 189 Kent St, Sydney NSW 2000 | GPO Box 2733, Sydney NSW 2001
+61 (0) 2 8046 2799 | admin@astutemetals.com
www.astutemetals.com
The Company is in the process of finalising its claims forms and expects to file these with Nye County in
the coming days. The Company is aware of a competitor that has staked claims in the same area and
it is possible that a number of the claims may be the subject of dispute. However, based on information
to hand, the Company considers that it will be in a position to secure a substantial part of the area.
Figure 2. Astute Metals Nevada Lithium Project locations and lithium deposits.
Next Steps
Over the coming month, the Company will plan drill locations at Cobre, undertake site inspections, and
submit permitting documentation to the Bureau of Land Management (BLM) with a view to drilling initial
holes at the project in Q4 2023. In parallel with drill planning activities, the Company is also actively
reviewing opportunities in the region to add to and/or consolidate the Project.
After the Red Mountain claims have been filed with Nye County, the Company will aim to:
•
resolve the claim areas that it is entitled to, including notifying the competitor of its position; and
•
commence a soil sampling campaign in order to identify lithium anomalies and generate targets
for drilling in the 2024 calendar year.
Suite 6, Level 5, 189 Kent St, Sydney NSW 2000 | GPO Box 2733, Sydney NSW 2001
+61 (0) 2 8046 2799 | admin@astutemetals.com
www.astutemetals.com
1 ASX: ARO 3 March 2023 ’Astro Advances Lithium Strategy with Key Appointments and Expansion of Highly Prospective Nevada Lithium Portfolio’
2 Smith, S.M., Azain, J.S., Bueghly, Z.C., and Olinger, D.A., 2018, Reanalysis of Selected Archived NURE-HSSR Sediment and Soil Samples
from Arizona, California, Idaho, Montana, Nevada, New Mexico, and Utah (ver. 8.0, May 2021): U.S. Geological Survey data release,
https://doi.org/10.5066/F7765DHF
Authorisation
This announcement has been authorised for release by the Board of Astute.
More Information
Matt Healy
General Manager – Exploration
mhealy@astutemetals.com
+61 (0) 431 683 952
Nicholas Read
Media & Investor Relations
nicholas@readcorporate.com.au
+61 (0) 419 929 046
Competent Persons
The information in this report that relates to Sampling Techniques and Data (Section 1) is based on
information compiled by Mr Matthew Healy, a Competent Person who is a Member of The Australasian
Institute of Mining and Metallurgy (AusIMM Member number 303597). Mr Healy is a full-time employee of
Astute Metals NL and is eligible to participate in a Loan Funded Share incentive plan of the Company. Mr
Healy has sufficient experience that is relevant to the style of mineralisation and type of deposit under
consideration and to the activity being undertaken to qualify as a Competent Person as defined in the
2012 Edition of the ‘Australasian Code for Reporting of Exploration Results, Mineral Resources and Ore
Reserves’. Mr Healy consents to the inclusion in the report of the matters based on his information in the
form and context in which it appears.
The information in this report that relates to Reporting of Exploration Results (Section 2) is based on
information compiled by Mr Richard Newport, principal partner of Richard Newport & Associates –
Consultant Geoscientists. Mr Newport is a member of the Australian Institute of Geoscientists and has
sufficient experience which is relevant to the style of mineralisation and type of deposit under
consideration and to the activity which he is undertaking to qualify as a Competent Person under the
2012 Edition of the ’Australasian Code for Reporting of Exploration Results, Mineral Resources and Ore
Reserves‘. Mr. Newport consents to the inclusion in this announcement of the matters based on his
information in the form and context in which it appears.
Suite 6, Level 5, 189 Kent St, Sydney NSW 2000 | GPO Box 2733, Sydney NSW 2001
+61 (0) 2 8046 2799 | admin@astutemetals.com
www.astutemetals.com
APPENDIX 1 - JORC Code, 2012 Edition – Table 1
Section 1 - Sampling Techniques and Data
Criteria
JORC Code explanation
Commentary
Sampling
techniques
Nature and quality of sampling (eg cut
channels, random chips, or specific
specialisedindustry standard measurement
tools appropriate to the minerals under
investigation, such as down hole gamma
sondes, or handheldXRF instruments, etc).
These examples should not be taken as
limiting the broad meaning of sampling.
Soil samples were conventional, and taken
from the B-Horizon, (where present) after
removal of the A-Horizon and sieved using a
12-mesh sieve. A nominal 0.5kg of sample was
collected at each sample location.
Include reference to measures taken to
ensuresample representivity and the
appropriate calibration of any
measurement tools or systems used.
Claystone hosted lithium deposits are thought to
form as a result of the weathering of
lithium-bearing volcanic glass within
tertiary-aged tuffaceous lacustrine sediments
ofthe mapped Ts3 unit. Inputs of lithium from
geothermal sources have also been proposed.
Aspects of the determination of
mineralisation that are Material to the
Public Report.
In cases where ‘industry standard’ work has
been done this would be relatively simple
(eg ‘reverse circulation drilling was used to
obtain 1 m samples from which 3 kg was
pulverised to produce a 30 g charge for fire
assay’). In other cases more explanation
may be required, suchas where there is
coarse gold that has inherentsampling
problems. Unusual commodities or
mineralisation types (eg submarine
nodules) may warrant disclosure of
detailed information.
Drilling
techniques
Drill type (eg core, reverse circulation, openholehammer, rotary air blast, auger, Bangka,
sonic, etc) and details (eg core diameter,
triple or standard tube, depth of diamond tails,
face-sampling bit or other type, whether core
isoriented and if so, by what method, etc).
Drill sample
recovery
Method of recording and assessing core
andchip sample recoveries and results
assessed.
Not applicable
Not applicable
Measures taken to maximise sample
recoveryand ensure representative nature
of the samples.
Whether a relationship exists between
sample recovery and grade and whether
sample bias may have occurred due to
preferential loss/gainof fine/coarse material.
Logging
Whether core and chip samples have
been geologically and geotechnically
logged to alevel of detail to support
appropriate MineralResource estimation,
mining studies and metallurgical studies.
Not applicable
Whether logging is qualitative or
quantitative innature. Core (or costean,
channel, etc) photography.
The total length and percentage of the
relevantintersections logged.
Suite 6, Level 5, 189 Kent St, Sydney NSW 2000 | GPO Box 2733, Sydney NSW 2001
+61 (0) 2 8046 2799 | admin@astutemetals.com
www.astutemetals.com
Criteria
JORC Code explanation
Commentary
Subsampling
techniques
and sample
preparation
If core, whether cut or sawn and whether
quarter, half or all core taken.
Full samples (i.e. samples were not split) were
submitted to ALS Laboratories in Elko for
preparation and analysis.
If non-core, whether riffled, tube sampled,
rotarysplit, etc and whether sampled wet or
dry.
For all sample types, the nature, quality
and appropriateness of the sample
preparationtechnique.
Quality control procedures adopted for all
sub-sampling stages to maximise
representivityof samples.
Measures taken to ensure that the
sampling isrepresentative of the in situ
material collected,including for instance
results for field duplicate/second-half
sampling.
Quality of
assay data
and
laboratory
tests
Whether sample sizes are appropriate to
thegrain size of the material being sampled.
The nature, quality and appropriateness of
the assaying and laboratory procedures
used and whether the technique is
considered partial ortotal.
For geophysical tools, spectrometers,
handheldXRF instruments, etc, the
parameters used in determining the analysis
including instrument make and model,
reading times, calibrations factors applied
and their derivation, etc.
Nature of quality control procedures
adopted (eg standards, blanks, duplicates,
external laboratory checks) and whether
acceptable levels of accuracy (ie lack of
bias) and precisionhave been established.
Verification
of sampling
and
assaying
The verification of significant intersections by
either independent or alternative company
personnel.
The use of twinned holes.
Documentation of primary data, data
entryprocedures, data verification, data
storage (physical and electronic)
protocols.
Samples were analysed by method ME-MS41
which is an ICP-MS method employing an
aqua-regia digest. Aqua-regia is not
considered a ‘total’ digest for many elements
however is considered fit for purpose for lithium
and has been used extensively by other parties
exploring for lithium claystone deposits in the
USA.
Assay quality was monitored using pulp blanks,
as well as certified reference materials (CRMs)
at a range of lithium grades. Pulp blank results
indicated no material contamination of
samples from the analytical process. CRM
results were within 3 standard deviations of
certified values. No systematic bias nor other
accuracy related issues were identified.
Samples were assigned a unique sample
identification number prior to sample despatch
Lithium-mineralised claystone Certified
Reference Materials (standards)and pulp
blanks were inserted into the sample stream
at regular intervals (1:25 ratio) to monitor lab
accuracy and potential contamination
during analytical processes
Discuss any adjustment to assay data.
Location of
data points
Accuracy and quality of surveys used to
locatedrill holes (collar and down-hole
surveys), trenches, mine workings and other
locations used in Mineral Resource
estimation.
Sample locations were pre-determined by
overlaying a grid and using hand-held GPS to
navigate to points. Locations are reported in
NAD83 UTM Zone 11. Expected site location
accuracy is +/- 10m
Specification of the grid system used.
Quality and adequacy of topographic
control.
Suite 6, Level 5, 189 Kent St, Sydney NSW 2000 | GPO Box 2733, Sydney NSW 2001
+61 (0) 2 8046 2799 | admin@astutemetals.com
www.astutemetals.com
APPENDIX 1 - JORC Code, 2012 Edition – Table 1
Criteria
JORC Code explanation
Commentary
Data
spacing
and
distribution
Data spacing for reporting of Exploration Results.
Not applicable
Whether the data spacing and distribution is
sufficient to establish the degree of geological
and grade continuity appropriate for the
MineralResource and Ore Reserve estimation
procedure(s) and classifications applied.
Whether sample compositing has been applied.
Orientation
of data in
relation to
geological
structure
Whether the orientation of sampling achieves
unbiased sampling of possible structures and
the extent to which this is known, considering the
deposit type.
Claystone beds are regionally sub-horizontal
withshallow dip of <5° although locally this may
vary
Sample
security
The measures taken to ensure sample security.
Sampling was undertaken by exploration
technical services group Rangefront Mining
Services. Samples were collected by Rangefront
personnel and returned to the Rangefront offices
in Elko, Nevada, for addition of QC entities and
were delivered directly to ALS Laboratories Elko
Audits or
reviews
The results of any audits or reviews of
samplingtechniques and data.
Not applicable
If the relationship between the drilling
orientation and the orientation of key
mineralised structures is considered to have
introduced a sampling bias, this should be
assessed and reported if material.
Suite 6, Level 5, 189 Kent St, Sydney NSW 2000 | GPO Box 2733, Sydney NSW 2001
+61 (0) 2 8046 2799 | admin@astutemetals.com
www.astutemetals.com
APPENDIX 1 - JORC Code, 2012 Edition – Table 1
Section 2 - Reporting of Exploration Results
Criteria
JORC Code explanation
Commentary
Mineral
tenement
and land
tenure status
Type, reference name/number, location and
ownership including agreements or material
issues with third parties such as joint ventures,
partnerships, overriding royalties, native title
interests, historical sites, wilderness or national
park and environmental settings.
Cobre claims held in 100% Astute subsidiary
Needles Holdings Inc.
The security of the tenure held at the time of
reporting along with any known impediments to
obtaining a licence to operate in the area.
COB001-018, COB035-053, COB101-110, COB199216, COB260-268, COB305-322, COB339-356,
COB375-392, COB411-426, COB429-446,
COB465-482, COB501-516
Exploration
done by
other parties
Acknowledgment and appraisal of exploration
byother parties.
No known lithium exploration conducted on
Polaris or Altair areas.
Geology
Deposit type, geological setting and style of
mineralisation.
Claims located on Federal (BLM) Land
Claim numbers (198 in total) are as follows:
Exploration conducted in the region by other
explorers referenced in announcement body
text
The principal target deposit style is claystone
hosted lithium mineralisation. Claystone hosted
lithium deposits are thought to form as a result of
the weathering of lithium-bearing volcanic glass
within tertiary-aged tuffaceous lacustrine
sediments of the mapped Ts3 unit.
Lacustrine environments formed as a result of
extensional tectonic regime that produced ‘basin
and range’ topography observed across the
stateof Nevada. Inputs of lithium from
geothermal sources have also been proposed.
Drill hole
Information
A summary of all information material to the
understanding of the exploration results
including a tabulation of the following
information for all Material drill holes:
◦ easting and northing of the drill hole collar
◦ elevation or RL (Reduced Level – elevation
above sea level in metres) of the drill hole
collar
◦ dip and azimuth of the hole
◦ down hole length and interception depth
◦ hole length.
Not applicable
If the exclusion of this information is justified on
the basis that the information is not Material and
this exclusion does not detract from the
understanding of the report, the Competent
Person should clearly explain why this is the case.
Data
aggregation
methods
In reporting Exploration Results, weighting
averaging techniques, maximum and/or
minimum grade truncations (eg cutting of high
grades) and cut-off grades are usually Material
and should be stated.
Not applicable
Where aggregate intercepts incorporate short
lengths of high grade results and longer lengths
of low grade results, the procedure used for such
aggregation should be stated and some
typical examples of such aggregations should
be shownin detail.
The assumptions used for any reporting of metal
equivalent values should be clearly stated.
Suite 6, Level 5, 189 Kent St, Sydney NSW 2000 | GPO Box 2733, Sydney NSW 2001
+61 (0) 2 8046 2799 | admin@astutemetals.com
www.astutemetals.com
Section 2 Reporting of Exploration Results
Criteria
JORC Code explanation
Commentary
Relationship
between
mineralisation
widths and
intercept
lengths
These relationships are particularly important in
the reporting of Exploration Results.
Not applicable
If the geometry of the mineralisation with respect
to the drill hole angle is known, its nature should
be reported.
If it is not known and only the down hole lengths
are reported, there should be a clear statement
to this effect (eg ‘down hole length, true width not
known’).
Diagrams
Appropriate maps and sections (with scales)
andtabulations of intercepts should be included
for any significant discovery being reported
These should include, but not be limited to a plan
view of drill hole collar locations and
appropriate sectional views.
Included in ASX announcement
Balanced
reporting
Where comprehensive reporting of all Exploration
Results is not practicable, representative
reporting of both low and high grades and/or
widths should be practiced to avoid misleading
reporting of Exploration Results.
This release describes all relevant information
Other
substantive
exploration
data
Other exploration data, if meaningful and
material, should be reported including (but not
limited to): geological observations;
geophysicalsurvey results; geochemical survey
results; bulk samples – size and method of
treatment; metallurgical test results; bulk
density, groundwater, geotechnical and rock
characteristics; potential deleterious or
contaminating substances.
This release describes all relevant information
Further work
The nature and scale of planned further work (eg
tests for lateral extensions or depth extensions or
large-scale step-out drilling).
Soil sample results will be used to design, permit
and drill exploration holes aimed to intersect
lithium mineralisation in the subsurface
Diagrams clearly highlighting the areas of
possible extensions, including the main
geological interpretations and future drilling
areas, provided this information is not
commercially sensitive.
Suite 6, Level 5, 189 Kent St, Sydney NSW 2000 | GPO Box 2733, Sydney NSW 2001
+61 (0) 2 8046 2799 | admin@astutemetals.com
www.astutemetals.com
APPENDIX 2 – Cobre Project
Soil Sample Locations and Assays
Sample ID
75385
78311
78204
Li (ppm)
Easting
Northing
Sample ID
146
718300
4549200
35.3
718300
220
718300
78535
38.8
75386
174
718400
78205
20.4
718403
78207
28.3
718499
13.8
718502
78534
78312
78508
38.6
47
116
718300
718397
718400
718497
78313
55.4
78507
48.6
718599
78532
12.2
718599
78533
78208
78314
78209
36.9
52.8
718501
718599
718601
28.7
718698
78227
50.2
718699
78531
33.3
718702
88.7
718799
78506
78315
78228
78505
78316
78211
78530
78212
82
34
59.6
60
42.8
69.1
61.1
718699
718701
718797
718800
718801
718801
718893
78229
67.4
718898
78529
78504
36.4
111.5
718899
718900
78318
55.8
78528
37.3
78317
78503
78213
78230
44.1
77.2
44.2
108
78248
28.4
78250
53.8
78552
87.7
78249
78551
49.7
718898
718999
719002
719002
719002
719003
719100
719195
719299
58.2
719398
78553
117.5
719599
78554
50.4
719698
78555
49.2
78564
44.1
78561
78562
78563
29.7
23.8
35.1
719501
719599
719699
719800
719800
719899
Li (ppm)
Easting
Northing
78556
30.8
719901
4553198
4552003
78565
44.9
720000
4553599
4552399
78566
4551601
4552401
4549200
4551598
4552006
78557
78558
78568
78559
78239
4549199
78569
4551599
78447
4552004
4552400
78457
78392
4549199
78448
4552399
78458
4552004
78446
4549599
78459
4552400
78445
4549202
78460
4551995
78444
4552003
4551600
4549198
4551600
4549600
4551599
4552400
4552001
78393
78426
78394
78427
78395
78428
78396
78461
4549603
78429
4552400
4549199
78442
78462
4551602
4549199
4551601
78443
78430
78397
4551997
78398
4549599
78441
4552400
4553200
4553201
78463
78431
78432
4553197
78440
4553202
78439
4553200
4553203
4553602
4553200
4553599
4553200
4553603
4553601
78399
78437
78433
78466
78400
78451
78467
78434
59.2
175
36.9
36.6
96.5
130.5
52.4
43.6
62.3
40.2
35.8
38.8
38.6
35.3
67.1
46.1
80.8
32
60.7
49.3
67.8
56.3
51.2
37.8
67.5
48.9
57.1
248
78.3
44.8
40.1
66.9
101.5
47.8
35.9
48.1
49.6
62.1
47.3
47.1
56
63.1
51.9
85.7
48.3
61
719998
720099
720100
720197
720198
720301
720302
720899
720899
720900
720900
721000
721001
721001
721001
721100
721100
721101
721101
721200
721200
721200
721200
721299
721300
721300
721301
721399
721400
721400
721401
721500
721500
721500
721501
721593
721599
721600
721600
721694
721700
721701
721704
721797
721800
721800
Suite 6, Level 5, 189 Kent St, Sydney NSW 2000 | GPO Box 2733, Sydney NSW 2001
+61 (0) 2 8046 2799 | admin@astutemetals.com
www.astutemetals.com
4553200
4553201
4553597
4553604
4553201
4553199
4553601
4548800
4549599
4548400
4549200
4548400
4548801
4549201
4549600
4548400
4548800
4549200
4549601
4548400
4548800
4549201
4549600
4548400
4548800
4549199
4549601
4549601
4548800
4549200
4548402
4548401
4548800
4549600
4549200
4549210
4549600
4548400
4549600
4549604
4549199
4548800
4548399
4548405
4548800
4549201
APPENDIX 2 – Cobre Project
Soil Sample Locations and Assays
Sample ID
Li (ppm)
Easting
Northing
Sample ID
78436
44.2
721802
4549608
78435
48.4
721900
4549200
78453
36.3
78452
78468
33.4
91.2
78469
114.5
78455
31
78454
78290
78289
78051
78182
36.5
722899
60.3
78183
78184
78292
722100
722200
135
51.3
78291
78054
722000
722898
66.2
44.4
78053
721901
722000
65.9
78063
78064
721900
34.2
72.1
581
53.5
57.9
98.1
722899
722900
722904
722996
723000
723000
723000
723096
723098
723099
78065
48.6
78293
31.5
723200
29.7
723201
78055
49.1
723099
723199
78185
85.5
78056
23.8
723294
21.1
723300
78068
78295
39.8
17.5
723399
723400
78187
17.6
723400
78066
78067
78294
78186
78057
78069
78296
78058
78188
49.1
45.2
35.2
22
20.5
43.2
70
723200
723299
723300
723400
723499
723500
723500
723500
78189
80.6
78059
24.2
723598
24
723605
78190
85.5
78195
22.6
78091
72
78070
78262
723600
723959
724000
22.2
724000
40.7
78353
10.7
78352
723597
13.2
78199
78635
723597
23.3
724000
724000
724001
4548400
4548800
Li (ppm)
Easting
Northing
78539
33.6
724002
4555000
78172
41
724100
4548400
78636
78157
4548401
78003
4548400
78200
4548800
4548399
4549999
78114
78354
78261
4549999
78538
4551200
78156
4550798
4550401
4550402
4550000
78351
78355
78002
78637
4550799
78050
4550800
78260
4551199
4551200
4550000
78173
78251
78113
4550395
78537
4550001
78638
4550397
78001
4550803
4551198
78174
78154
4550801
78259
4550000
78049
4550397
4550000
78252
78536
4551199
78640
4550396
4551200
4550798
4550398
4550000
4550800
78356
78101
78257
78639
78175
78153
4551200
78008
4551200
78048
4550000
78634
4551996
78641
4551200
4550797
4550397
4552400
78357
78102
78253
78176
4552801
78358
4555800
78152
4555398
4556201
78047
78104
25.6
1640
79.9
101.5
29.4
26.7
22.2
12.5
27.6
228
24.5
108
34.1
21.1
47.1
27.1
29.3
44.5
22.8
55.2
24.8
170
75.7
35.4
24.5
28.5
71.2
30.1
29.9
29.5
24.2
24.7
51.9
96.6
674
25.9
26.3
55
24.5
38.6
31.3
56.6
26.2
25.4
34.3
69.9
724097
724100
724100
724100
724100
724100
724101
724101
724101
724199
724199
724200
724200
724200
724201
724201
724201
724202
724202
724299
724299
724300
724300
724300
724300
724300
724302
724302
724302
724399
724399
724399
724400
724400
724400
724400
724400
724401
724401
724402
724498
724500
724500
724500
724501
724501
Suite 6, Level 5, 189 Kent St, Sydney NSW 2000 | GPO Box 2733, Sydney NSW 2001
+61 (0) 2 8046 2799 | admin@astutemetals.com
www.astutemetals.com
4555402
4548801
4549200
4549599
4552802
4555800
4552401
4555002
4556200
4548803
4555800
4549200
4555399
4556200
4548400
4552401
4552798
4549599
4554999
4548400
4555400
4548797
4549201
4552400
4555800
4556200
4549601
4552800
4554999
4552399
4555399
4555400
4548399
4548800
4549200
4555800
4556201
4549602
4554998
4552799
4555401
4548400
4555800
4556200
4548801
4549598
APPENDIX
APPENDIX
2 –2Cobre
– Cobre
Project
Project
SoilSoil
Sample
Sample
Locations
Locations
and
and
Assays
Assays
Sample ID
Li (ppm)
Easting
Northing
78254
25.9
724501
4552800
78633
28.1
724502
4555006
78256
78011
26.2
33.8
724502
724511
78177
25.8
724599
78642
36.5
724599
78151
78046
78009
17.9
34.3
29.2
78632
30.2
78105
21.4
78359
27.7
78255
25.7
78012
35.2
78106
78631
78643
78360
78045
78178
724599
724599
724600
724600
724600
724601
724601
18.3
724698
22.5
724700
24.8
26.8
57.3
63.2
724700
724700
724700
724700
724701
78179
24.8
724798
78362
25.8
724799
78107
78013
78044
78363
78043
37.9
172.5
724800
22
724900
29.1
39
78108
472
78364
78042
24.4
30
78109
724798
724800
724900
724902
118
724999
27.5
725099
78041
26.5
725100
78366
22.2
78111
78365
78112
78039
30.3
27.7
27.7
725000
725000
725100
725199
725200
725200
4552400
4549201
4548400
4548798
4555402
4556200
4549200
4555000
4555799
4549599
4552398
4549597
4549200
4555001
4555400
4555799
4556200
4548399
4548402
4549600
4555800
4549201
4556200
4555800
4556200
4549602
4549598
4555800
4556199
4549599
4555800
4556200
4549597
4555800
4556200
Suite 6, Level 5, 189 Kent St, Sydney NSW 2000 | GPO Box 2733, Sydney NSW 2001
+61 (0) 2 8046 2799 | admin@astutemetals.com
www.astutemetals.com
Share your feedback
Discover