Further Beneficiation Results for Red Mountain
Released
Released
Announcement PDF
10 June 2025
BENEFICIATION DELIVERS 4,480ppm LITHIUM CLAY
CONCENTRATE AT RED MOUNTAIN PROJECT, USA
Latest results reinforce ability to upgrade Red Mountain mineralisation
Key Highlights
•
Follow-up Falcon C beneficiation testwork completed on
diamond drill core samples from the Red Mountain Project.
•
Sample upgraded from 3,245ppm to 4,481ppm Lithium.
•
Successful removal of 51.8% of dense material and
concurrent 38% increase in lithium grade.
•
Reinforces the April 2025 results indicating that Red
Mountain mineralisation may be upgraded using
beneficiation.
•
Attrition Scrubbing beneficiation testwork now underway for
comparison with the Falcon testwork results.
•
Leaching testwork to be undertaken on Falcon and Attrition
Scrubbing products to confirm reduced acid consumptions.
Astute Metals NL (ASX: ASE) (“ASE”, “Astute” or “the Company”) is pleased to report further positive results
from the latest phase of beneficiation testwork for its 100%-owned Red Mountain Lithium Project in
Nevada, USA. The results continue to strengthen the Project’s commercial development potential.
Following on from the results announced on 22 April 2025, this second phase of Falcon Beneficiation
testwork was designed to concentrate lithium-bearing clay and remove unmineralized gangue (waste)
in order to decrease mass and increase lithium grade. In a mineral processing context, a reduction in
tonnes and volume processed with an increased head-grade typically results in lower processing costs.
This second Falcon testwork program was conducted by Sepro Laboratories (Sepro) and utilised highclay drill core samples from hole RMDD002 (which intersected 86.9m @ 1,470ppm Li from 18.3m4). This
follow-up test was designed to establish how high-clay material performed using the Falcon method,
for comparison with results from the previous test conducted on lower grade mineralisation from Red
Mountain.
The latest result indicates a strong ability to upgrade mineralisation, achieving a reduction of sample
mass by 51.8% with a concurrent increase in lithium grade of 38% (from 3,245 to 4,481ppm Li), with an
overall 66.6% lithium recovery. These results compare favourably with the previous round of testwork,
exhibiting both a greater upgrade in lithium and reduction in mass, with a substantial 43% reduction in
calcium and carbon (interpreted as calcite removal) expected to result in a significant reduction in
acid consumption. The Company has commissioned Attrition Scrubbing testwork – another method of
beneficiation – for comparison with the Falcon results. Once complete, sample products from both the
Falcon and Attrition Scrubbing tests will be assessed for acid consumption in future leachability tests.
Astute Chairman, Tony Leibowitz, said: “The demonstration of a commercial pathway to a lithium
product is the natural complement to the establishment of a Mineral Resource. It is for this reason
that Astute has actively advanced workflows for both exploration drilling and metallurgical testing
at Red Mountain, in tandem. These positive results, which reinforce the previous results from the
project, represent the systematic de-risking of what continues to emerge as an important USbased critical metals project.”
Suite 6, Level 5, 189 Kent St, Sydney NSW 2000 | GPO Box 2733, Sydney NSW 2001
+61 (0) 2 8046 2799 | admin@astutemetals.com
www.astutemetals.com
Figure 1. Clay-rich RMDD002 drill-core from 160-165ft (3,280ppm Li) used in Falcon beneficiation testwork.
Background
Located in central-eastern Nevada (Figure 4), adjacent to the Grand Army of the Republic Highway
(Route 6), which links the regional mining towns of Ely and Tonopah, the Red Mountain Project was staked
by Astute in August 2023.
The Project area has broad mapped tertiary lacustrine (lake) sedimentary rocks known locally as the
Horse Camp Formation1. Elsewhere in the state of Nevada, equivalent rocks host large lithium deposits
(see Figure 4) such as Lithium Americas’ (NYSE: LAC) 62.1Mt LCE Thacker Pass Project 2 and American
Lithium (TSX.V: LI) 9.79Mt LCE TLC Lithium Project3.
Astute has completed substantial surface sampling campaigns at Red Mountain, which indicate
widespread lithium anomalism in soils (Figure 3) and confirmed lithium mineralisation in bedrock with
some exceptional grades of up to 4,150ppm Li1,5.
A total of 19 RC and diamond drill holes have been drilled at the project to date for a combined 3,666m.
Exploration drilling has been highly successful, with strong lithium mineralisation intersected in every hole
for which assays have been received9.
Scoping leachability testwork on mineralised material from Red Mountain indicates high leachability of
lithium of up to 98%, varying with temperature, acid strength and leaching duration, and proof-ofconcept beneficiation testwork has indicated the potential to upgrade the Red Mountain mineralisation 6,8.
About Beneficiation
The primary purpose of beneficiation is to optimise the value of mineralised material by separating
unwanted waste material (gangue) from valuable minerals.
Testwork conducted to date at Red Mountain indicates that clay-hosted lithium mineralisation may be
upgraded through beneficiation, which seeks to remove coarser grained material, such as particles of
sand, that do not contain appreciable lithium 8. Successful beneficiation can result in reduced reagent
consumption, reduced plant wear and tear, and a reduced environmental footprint.
Suite 6, Level 5, 189 Kent St, Sydney NSW 2000 | GPO Box 2733, Sydney NSW 2001
+61 (0) 2 8046 2799 | admin@astutemetals.com
www.astutemetals.com
Figure 2. Falcon C Rougher test-work flowsheet.
Test-work Overview
In April 2025, the Company despatched a composite sample of drill-core to Sepro for scoping-level
beneficiation testwork using a Falcon Continuous (Falcon C) Concentrator (Figure 2). Results from this
testwork indicated that Red Mountain mineralisation was able to be beneficiated using the Falcon
method. One recommendation following the testwork was to perform future testwork on higher clay
content samples, as these were likely to have an improved response to the Falcon C method. The current
testwork was conducted on Red Mountain sample with a high clay content.
The testwork program included:
• Coarse crushing and passed through a 1.18mm screen to prevent over crushing;
• Splitting into test charges and sample for head assay;
• Conducting a fifteen-stage Falcon C Rougher test conducted on as sub-sample of p80 of 159µ
• 4-acid/ICP assay of samples;
• Analysis of process water; and
• Duplicate assay of Falcon tail samples (i.e. clay concentrate).
Falcon test conditions comprised a pulp density of 15%, a G-Force of 300g and 78.3Hz speed.
Sepro, which is based in Langley, British Columbia, Canada, has conducted Falcon C testwork for other
lithium clay projects in Nevada, such as Surge Battery Metals’ (TSX: NILI) Nevada North Project7.
Metallurgical Sample Selection
A composite 13.03kg sample was selected to allow for the planned testwork as well as follow-up tests
as required. The sample comprised a single consecutive 4.1m (13.4ft) of half-HQ drill core from diamond
drill-hole RMDD002, collared in the north of the Red Mountain Project (see Figure 3, Table 4). This sample
interval was selected due to its high clay content, to compare with results from testwork on low-grade
material conducted earlier this year.
A summary of the metallurgical samples is provided below in Table 1.
Sample ID
703332
703333
703334
Sample
Type
½ HQ
Core
½ HQ
Core
½ HQ
Core
Hole ID
Interval
(ft)
RMDD002
151.6 – 155
RMDD002
155 - 160
RMDD002
160 – 165
Summary Lithology
Clay-rich mudstone with
coarse sand-sized calcite
grains in part and minor
limestone
Table 1. Metallurgical sample details
Results
The results of the Falcon C test are shown in Tables 2 and 3 below. The highest mass rejection was
achieved in stages 6-7, with diminishing mass rejection for the following 8 stages, with a total of 51.8%
mass rejection. Lithium grade increased from a calculated head grade of 3,245ppm to a final Falcon
tails concentrate grade of 4,481ppm Li, representing a 38% increase over the full 15 stages of
concentration. Lithium recovery was 66.6%.
Notably, calcium grades decreased by 43.5%, from 11.76wt% in the calculated head to 6.65wt% Ca in the
Suite 6, Level 5, 189 Kent St, Sydney NSW 2000 | GPO Box 2733, Sydney NSW 2001
+61 (0) 2 8046 2799 | admin@astutemetals.com
www.astutemetals.com
tails concentrate.
Interpretation and Next Steps
The results of the single test are consistent with the previous results, confirming that the feed grade of
Red Mountain mineralised material can be upgraded using the Falcon C process.
The previous test, conducted on lower-grade material, achieved a 36.3% mass rejection and a 22%
associated increase in lithium grade at 77.8% recovery. The current results achieved approximately the
same mass rejection (37.8%) after 11 stages, increasing the lithium grade by a greater 24.5% (to
4,043ppm), albeit at a slightly lower 73.9% recovery. After a further four stages of concentration the
resulting lithium grade increased by another 13% to 4,481ppm, however overall lithium recovery to the
light fraction was reduced to 66.6%.
The reduction of calcium from the head to the tails concentrate was replicated in the current results,
however was significantly more pronounced than in the earlier testwork. Calcium and carbon
concentrations in the current testwork were reduced by 43.5% and 48.8%, respectively.
The reduction in calcium and carbon, interpreted to indicate removal of the mineral calcite, is an
excellent outcome, as calcite is likely to be the most acid-consuming mineral in the processing of
lithium clays such as those found at Red Mountain. Calcite was the most predominant calcium mineral
identified in mineralogy conducted previously at the Project 6. The potential reduction in acid
consumption will be confirmed in future leach testing of both the head sample and products of the
Falcon testwork.
Sepro has advised that drum rolling and/or light grinding ahead of the Falcon test may result in
enhanced recoveries of lithium, and this work is under consideration. In addition, the Company has
engaged Colorado-based Hazen Research to undertake a comparative beneficiation method, Attrition
Scrubbing, on the Red Mountain mineralisation. Attrition Scrubbing has been used to successfully
beneficiate lithium clays elsewhere in Nevada.
Table 2. Falcon Rougher Test Results - lithium
Table 3. Falcon Rougher Test Assay Results
Suite 6, Level 5, 189 Kent St, Sydney NSW 2000 | GPO Box 2733, Sydney NSW 2001
+61 (0) 2 8046 2799 | admin@astutemetals.com
www.astutemetals.com
Figure 3. Metallurgical sample location plan over gridded lithium in soil geochemistry.
Drill Hole ID
RMDD002
Easting
Northing
RL
Dip
Azimuth
(NAD83)
(NAD83)
(m)
(°)
(°)
(m)
637186
4290574
1709
-50
270
182.88
Table 4. RMDD002 drill-hole collar details
Suite 6, Level 5, 189 Kent St, Sydney NSW 2000 | GPO Box 2733, Sydney NSW 2001
+61 (0) 2 8046 2799 | admin@astutemetals.com
www.astutemetals.com
Depth Drilled
Figure 4. Location of Astute Lithium Projects and Nevada lithium deposits.
1 ASX: ASE 8 July 2024 ‘High-Grade Rock Chip Assays at Red Mountain Project’
2 NYSE: LAC 31 December 2024 Updated NI 43-101 Technical Report for the Thacker Pass Project
3 TSX.V: LI 17 March 2023 ‘Tonopah Lithium Claims project NI 43-101 technical report – Preliminary Economic Assessment’
4 ASX: ASE 20 January 2025 ‘Extension of Lithium Discovery at Red Mountain Project’
5 ASX: ASE 20 November 2023 ‘Large Lithium Soil Anomalies Discovered at Red Mountain’
6 ASX: ASE 9 December 2024 ‘Positive initial metallurgical results from Red Mountain’
7 TSX: NILI October 29 2024 Surge Battery Metals Acheives Successful Lithium Clay Beneficiation
8 ASX: ASE 22 April 2025 ‘Beneficiation testwork successfully upgrades mineralisation at Red Mountain’
9 ASX: ASE 29 May 2025 ‘Two zones of lithium confirmed in latest drill-hole at Red Mountain’
Suite 6, Level 5, 189 Kent St, Sydney NSW 2000 | GPO Box 2733, Sydney NSW 2001
+61 (0) 2 8046 2799 | admin@astutemetals.com
www.astutemetals.com
Authorisation
This announcement has been authorised for release by the Board of Astute.
Astute Metals NL Interactive Investor Hub
Engage with Astute Metals through accessing reports, presentations, interviews and
other Company content.
Ask questions and browse responses to other investors’ questions
Click on https://astutemetals.com/auth/signup and follow the prompts to sign up
More Information
Matt Healy
Executive Director & CEO
mhealy@astutemetals.com
+61 (0) 431 683 952
Nicholas Read
Media & Investor Relations
nicholas@readcorporate.com.au
+61 (0) 419 929 046
Competent Persons
The information in this report that relates to Sampling Techniques and Data (Section 1) is based on
information compiled by Mr. Matthew Healy, a Competent Person who is a Member of The Australasian
Institute of Mining and Metallurgy (AusIMM Member number 303597). Mr. Healy is a full-time employee
of Astute Metals NL and is eligible to participate in a Loan Funded Share incentive plan of the Company.
Mr. Healy has sufficient experience that is relevant to the style of mineralisation and type of deposit
under consideration and to the activity being undertaken to qualify as a Competent Person as defined
in the 2012 Edition of the ‘Australasian Code for Reporting of Exploration Results, Mineral Resources and
Ore Reserves’. Mr. Healy consents to the inclusion in the report of the matters based on his information
in the form and context in which it appears.
The information in this report that relates to Reporting of Exploration Results (Section 2) is based on
information compiled by Mr. Richard Newport, principal partner of Richard Newport & Associates –
Consultant Geoscientists. Mr. Newport is a member of the Australian Institute of Geoscientists and has
sufficient experience which is relevant to the style of mineralisation and type of deposit under
consideration and to the activity which he is undertaking to qualify as a Competent Person under the
2012 Edition of the ’Australasian Code for Reporting of Exploration Results, Mineral Resources and Ore
Reserves‘. Mr. Newport consents to the inclusion in this announcement of the matters based on his
information in the form and context in which it appears.
Suite 6, Level 5, 189 Kent St, Sydney NSW 2000 | GPO Box 2733, Sydney NSW 2001
+61 (0) 2 8046 2799 | admin@astutemetals.com
www.astutemetals.com
APPENDIX 1 - JORC Code, 2012 Edition – Table 1
Section 1 - Sampling Techniques and Data
Criteria
JORC Code explanation
Commentary
Sampling
techniques
Nature and quality of sampling (e.g. cut
channels, random chips, or specific
specialisedindustry standard measurement
tools appropriate to the minerals under
investigation, such as down hole gamma
sondes, or handheldXRF instruments, etc.).
These examples should not be taken as
limiting the broad meaning of sampling.
Triple-tube HQ diamond drilling was undertaken for
drill sample collection. Samples were collected on a
nominal 5-foot basis or sampled to geological
boundaries based on lithological logging. Samples
were photographed, half-cored, and despatched to
an external lab by an external contractor.
Include reference to measures taken to
ensuresample representivity and the
appropriate calibration of any measurement
tools or systems used.
Aspects of the determination of mineralisation
thatare Material to the Public Report.
In cases where ‘industry standard’ work has
been done this would be relatively simple
(e.g. ‘reverse circulation drilling was used to
obtain 1 m samples from which 3 kg was
pulverised to produce a 30 g charge for fire
assay’). In other cases, more explanation may
be required, suchas where there is coarse
gold that has inherentsampling problems.
Unusual commodities or mineralisation types
(e.g. submarine nodules) may warrant
disclosure of detailed information.
The remaining half-core was selected for use in
metallurgical test-work.
Claystone hosted lithium deposits are thought to
form as a result of the weathering of
lithium-bearing volcanic glass within
tertiary-aged tuffaceous lacustrine sediments of
the mapped Ts3 unit. Inputs of lithium from
geothermal sources have also been proposed.
Drilling
techniques
Drill type (e.g. core, reverse circulation, openholehammer, rotary air blast, auger, Bangka,
sonic, etc.) and details (e.g. core diameter,
triple or standard tube, depth of diamond tails,
face-sampling bit or other type, whether core
isoriented and if so, by what method, etc.).
Triple tube HQ drilling methods employed. Core was
oriented where possible, although the soft nature of
the lithology precluded this for the most part.
Drill sample
recovery
Method of recording and assessing core and
chip sample recoveries and results assessed.
Sample recovery established by recovery logging
and dry sample weights undertaken by
independent laboratory prior to sample
preparation and analysis
Measures taken to maximise sample recovery
and ensure representative nature of the
samples.
Logging
Poor drill core recovery at surface.
Whether a relationship exists between
sample recovery and grade and whether
sample bias may have occurred due to
preferential loss/gainof fine/coarse material.
Instances of poor recovery are not expected to
materially impact interpretation of results
Whether core and chip samples have been
geologically and geotechnically logged to a
level of detail to support appropriate Mineral
Resource estimation, mining studies and
metallurgical studies.
Drill core for the entire hole was logged for lithology
by company geologists
Sepro undertook weighing on sample receipt.
Logging is qualitative
Whether logging is qualitative or quantitative
innature. Core (or costean, channel, etc.)
photography.
The total length and percentage of the
relevantintersections logged.
Suite 6, Level 5, 189 Kent St, Sydney NSW 2000 | GPO Box 2733, Sydney NSW 2001
+61 (0) 2 8046 2799 | admin@astutemetals.com
www.astutemetals.com
APPENDIX 1 - JORC Code, 2012 Edition – Table 1
Criteria
JORC Code explanation
Commentary
Subsampling
techniques
and sample
preparation
If core, whether cut or sawn and whether
quarter, half or all core taken.
Sample, once received by Sepro, was crushed to
6 mesh break up lumps within the sample,
homogenised and split into representative test
charges.
If non-core, whether riffled, tube sampled, rotary
split, etc. and whether sampled wet or dry.
For all sample types, the nature, quality and
appropriateness of the sample preparation
technique.
A sub-sample was grinded to a p80 of 105µ for
Falcon C Rougher tests.
Quality control procedures adopted for all
sub-sampling stages to maximise
representivityof samples.
Measures taken to ensure that the sampling is
representative of the in-situ material
collected,including for instance results for field
duplicate/second-half sampling.
Quality of
assay data
and
laboratory
tests
Whether sample sizes are appropriate to the
grain size of the material being sampled.
The nature, quality and appropriateness of the
assaying and laboratory procedures used and
whether the technique is considered partial or
total.
For geophysical tools, spectrometers, handheld
XRF instruments, etc., the parameters used in
determining the analysis including instrument
make and model, reading times, calibrations
factors applied and their derivation, etc.
Nature of quality control procedures adopted
(e.g. standards, blanks, duplicates, external
laboratory checks) and whether acceptable
levels of accuracy (i.e. lack of bias) and
precisionhave been established.
Verification
of sampling
and
assaying
The verification of significant intersections by
either independent or alternative company
personnel.
Head analyses were performed using a 4-acid
digest and ICP-OES for individual elements.
Peroxide fusion analysis was also conducted for
‘whole rock’ geochemistry.
Falcon concentrate samples were assayed using a
4-acid digest and ICP-OES finish
Falcon test process water was also collected for
solution assay for lithium to ensure lithium was not
being lost to process water. Results indicated
insignificant concentrations of lithium in process
water.
Sub-samples, when processed by Sepro, were
assigned a unique Sepro sample identification
number for each sample/charge.
The use of twinned holes.
Documentation of primary data, data entry
procedures, data verification, data storage
(physical and electronic) protocols.
Discuss any adjustment to assay data.
Location of
data points
Accuracy and quality of surveys used to locate
drill holes (collar and down-hole surveys),
trenches, mine workings and other locations
used in Mineral Resource estimation.
Specification of the grid system used.
Quality and adequacy of topographic control.
Drill collar locations determined using hand-held
GPS with location reported in NAD83 UTM Zone 11.
Expected hole location accuracy of +/- 10m
Downhole survey measurements were taken at
nominal 100ft intervals using a north-seeking
Gyro
Suite 6, Level 5, 189 Kent St, Sydney NSW 2000 | GPO Box 2733, Sydney NSW 2001
+61 (0) 2 8046 2799 | admin@astutemetals.com
www.astutemetals.com
APPENDIX 1 - JORC Code, 2012 Edition – Table 1
Criteria
JORC Code explanation
Commentary
Data spacing
anddistribution
Data spacing for reporting of Exploration
Drill spacing is appropriate for early exploration
purposes
Results.
Whether the data spacing and distribution
is sufficient to establish the degree of
geological and grade continuity appropriate
for the MineralResource and Ore Reserve
estimation procedure(s) and
classifications applied.
Whether sample compositing has been
applied.
Orientationof
data in relation
to geological
structure
Whether the orientation of sampling
achieves unbiased sampling of possible
structures and the extent to which this is
known, considering thedeposit type.
Claystone beds are regionally shallow-dipping at
~20° to the east although locally this may vary
across the Project with some evidence of faulting
and potential folding
If the relationship between the drilling
orientation and the orientation of key
mineralised structures is considered to have
introduced a sampling bias, this should be
assessed and reported if material.
Samplesecurity
The measures taken to ensure sample
security.
Samples stored at secured yard and shed located
in township of Currant until freighted by UPS to the
Sepro lab at BC, Canda
Audits orreviews
The results of any audits or reviews of
samplingtechniques and data.
Not applicable
Suite 6, Level 5, 189 Kent St, Sydney NSW 2000 | GPO Box 2733, Sydney NSW 2001
+61 (0) 2 8046 2799 | admin@astutemetals.com
www.astutemetals.com
APPENDIX 1 - JORC Code, 2012 Edition – Table 1
Section 2 - Reporting of Exploration Results
Criteria
JORC Code explanation
Commentary
Mineral
tenement
and land
tenure status
Type, reference name/number, location and
ownership including agreements or material
issues with third parties such as joint ventures,
partnerships, overriding royalties, native title
interests, historical sites, wilderness or nationalpark
and environmental settings.
Red Mountain Claims held in 100% Astute
subsidiary Needles Holdings Inc.
The security of the tenure held at the time of
reporting along with any known impediments to
obtaining a licence to operate in the area.
Exploration
done by
other parties
Acknowledgment and appraisal of exploration by
other parties.
Geology
Deposit type, geological setting and style of
mineralisation.
Claims located on Federal (BLM) Land
Drilling conducted on claims certified by the
Bureau of Land Management (BLM)
No known previous lithium exploration conducted
at Red Mountain
Exploration conducted elsewhere in Nevada by
other explorers referenced in announcement
body text
The principal target deposit style is claystone
hosted lithium mineralisation. Claystone hosted
lithium deposits are thought to form as a result of
the weathering of lithium-bearing volcanic glass
within tertiary-aged tuffaceous lacustrine
sediments of the mapped Ts3 unit.
Lacustrine environments formed as a result of
extensional tectonic regime that produced ‘basin
and range’ topography observed across the
stateof Nevada. Inputs of lithium from
geothermal sources have also been proposed.
Drill hole
Information
A summary of all information material to the
understanding of the exploration results including
a tabulation of the following information for all
Material drill holes:
◦ easting and northing of the drill hole collar
◦ elevation or RL (Reduced Level – elevation
above sea level in metres) of the drill hole
collar
◦ dip and azimuth of the hole
◦ down hole length and interception depth
◦ hole length.
Drillhole locations, orientations and drilled depths
are tabulated in body report
If the exclusion of this information is justified on the
basis that the information is not Material and this
exclusion does not detract from the
understanding of the report, the Competent
Person should clearly explain why this is the case.
Data
aggregation
methods
In reporting Exploration Results, weighting
averaging techniques, maximum and/or
minimum grade truncations (e.g. cutting of high
grades) and cut-off grades are usually Material
and should be stated.
Where aggregate intercepts incorporate short
lengths of high grade results and longer lengths of
low grade results, the procedure used for such
aggregation should be stated and some typical
examples of such aggregations should be shown
in detail.
The assumptions used for any reporting of metal
equivalent values should be clearly stated.
Intersections, where quoted are weighted by
length. Lengths originally recorded in feet are
quoted to the nearest 10cm.
Rounding is conducted to 3 significant figures
A 500ppm Li cut-off was used to quote
headline intersections, with allowance for 5ft of
internal dilution by lower grade material.
Low grade mineralisation (300-500ppm Li) is
present outside of the quoted intersections
Intersections are quoted in both lithium ppm and
as wt% Lithium Carbonate Equivalent (LCE). LCE is
calculated as LCE = Li (ppm) x 5.323 / 10,000, as
per industry conventions.
Suite 6, Level 5, 189 Kent St, Sydney NSW 2000 | GPO Box 2733, Sydney NSW 2001
+61 (0) 2 8046 2799 | admin@astutemetals.com
www.astutemetals.com
Section 2 Reporting of Exploration Results
Criteria
JORC Code explanation
Commentary
Relationship
between
mineralisatio
n widths and
intercept
lengths
These relationships are particularly important in
the reporting of Exploration Results.
Insufficient information available due to early
exploration status
If the geometry of the mineralisation with respect
to the drill hole angle is known, its nature should be
reported.
If it is not known and only the down hole lengths
are reported, there should be a clear statement
to this effect (e.g. ‘down hole length, true width not
known’).
Diagrams
Appropriate maps and sections (with scales)
andtabulations of intercepts should be included
for any significant discovery being reported
These should include, but not be limited to a plan
view of drill hole collar locations and appropriate
sectional views.
Included in ASX announcement
Balanced
reporting
Where comprehensive reporting of all Exploration
Results is not practicable, representative
reporting of both low and high grades and/or
widths should be practiced to avoid misleading
reporting of Exploration Results.
This release describes all relevant information
Other
substantive
exploration
data
Other exploration data, if meaningful and material,
should be reported including (but not limited to):
geological observations; geophysicalsurvey
results; geochemical survey results; bulk samples
– size and method of treatment; metallurgical
test results; bulk density, groundwater,
geotechnical and rock characteristics; potential
deleterious or contaminating substances.
This release describes all relevant information
Further work
The nature and scale of planned further work (e.g.
tests for lateral extensions or depth extensions or
large-scale step-out drilling).
Falcon C beneficiation test-work results
demonstrate further work at the Red Mountain
project is warranted. Sepro consider that higher
clay content samples are likely to have
improved test-work outcomes.
Diagrams clearly highlighting the areas of
possible extensions, including the main geological
interpretations and future drillingareas, provided
this information is not commercially sensitive.
Suite 6, Level 5, 189 Kent St, Sydney NSW 2000 | GPO Box 2733, Sydney NSW 2001
+61 (0) 2 8046 2799 | admin@astutemetals.com
www.astutemetals.com
Suite 6, Level 5, 189 Kent St, Sydney NSW 2000 | GPO Box 2733, Sydney NSW 2001
+61 (0) 2 8046 2799 | admin@astutemetals.com
www.astutemetals.com
Share your feedback
Discover